LBO 27 Zoll - 第93页
LBO 27" 2 Assembly instructions LBO 27" SIPLACE X4 09/2007 Edition 93 2.10 Plan 2 Fig. 2.6 - 1 Plan wiring stopper
2 Assembly instructions LBO 27" SIPLACE X4 LBO 27"
09/2007 Edition
92
2.9 Disassembling
2
Attention:
Before removing the stopper, it is necessary to send a job to the machine with deactivated LBO
settings under SIPLACE PRO. Otherwise there will be an error after the stoppers are removed
from the machine. This error disappears only if the stopper is installed back to the machine! 2
2
: The transport control unit has to be reset to the standard values. Follow the instruction under
2.8.3 and change the value which was set to “1250” back to the original value of “600”.
: Shut down the machine and switch it off at the main switch!
: The mechanical removal of the stopper has to be proceeded in the reverse direction as the in-
stallation.
: Fasten the alloy block with the origin M6 x 30 mm hexagon socket screws.
2
LBO 27" 2 Assembly instructions LBO 27" SIPLACE X4
09/2007 Edition
93
2.10 Plan
2
Fig. 2.6 - 1 Plan wiring stopper
2 Assembly instructions LBO 27" SIPLACE X4 LBO 27"
09/2007 Edition
94