2OM-1088-002.pdf - 第177页

Tg0699-PM-D2 0207-001 Chapter 1 4-29 4.1 "Machine Offset" T ab Squeegee-Screen : Enter an offset value in the text box, based on the specified distance in the Y direction between the squeegee origin and the scr…

Tg0699-PM-D2

The offset can automatically be set

through the teaching operation.

Screen Distance : Enter an offset value in the text box,

based on the specified distance in the Z

direction between the underside of the

screen and the upper surface of the P.C.B.

for printing.

0207-001 Chapter 1 4-28

4.1 "Machine Offset" Tab

••

• Sheet Composition

*1 Offset Entry Area for Each Unit

Offset values can be entered for each unit.

Camera Stopper : When the P.C.B. stop position has devi-

ated from the table center, set the offset

data for the correction.

Fig. 3D19

Fig. 3D20

Tg0699-PM-D2

0207-001 Chapter 1 4-29

4.1 "Machine Offset" Tab

Squeegee-Screen : Enter an offset value in the text box,

based on the specified distance in the Y

direction between the squeegee origin and

the screen center.

Fig. 3D21

Vacuum Plate : Enter an offset value in the text box,

based on the specified distance in the X

direction between the center of the P.E.C.

recognition camera and the end plane of

the P.C.B. vacuum jig.

Fig. 3D22

Tg0699-PM-D2

0207-001 Chapter 1 4-30

4.1 "Machine Offset" Tab

P.C.B. Transfer Height : Enter an offset value in the text

box, based on the specified distance

in the Z direction between the upper

surface of the table chute at its origin

and the lower surface of the P.C.B.

Fig. 3D23

Cleaning : Enter an offset value in the text box,

based on the specified distance in the

X direction between the cleaning head

at its cleaning position and the screen

center.

Fig. 3D24

P.C.B. Chuck Height : Enter an offset value in the text box,

based on the specified distance in the

Z direction between the P.C.B. backup

table at its origin and the lower surface

of the P.C.B.

Fig. 3D25