2OM-1088-002.pdf - 第185页
Tg0699-PM-D2 0207-001 Chapter 1 4-36 4.3 "Screen Recog. Camera" T ab *2 Camera Magnification Enter values as magnifications of the screen recognition camera in the text boxes. Make the ten-key window appear and…
Tg0699-PM-D2
0207-001 Chapter 1 4-35
4.3 "Screen Recog. Camera" Tab
••
••
• Sheet Composition
*1 Camera Offset
Enter offset values in the text boxes, regarding the difference in
the distance and angle of each axis between the centers of the
screen recognition camera and the table chute. The entered
values are used to change the specified ones.
With Front Reference
With Rear Reference
Make the ten-key window appear and enter the offset
values in the text boxes.
Fig. 3D30
P.C.B.
Screen Recognition Camera
P.C.B. Origin
20
Table Origin
P.C.B.
Screen Recognition Camera
P.C.B. Origin
401
Table Origin
Fig. 3D30-1
Tg0699-PM-D2
0207-001 Chapter 1 4-36
4.3 "Screen Recog. Camera" Tab
*2 Camera Magnification
Enter values as magnifications of the screen recognition camera
in the text boxes.
Make the ten-key window appear and enter distances
(unit: µm) per pixel in the X and Y directions.
*3 Screen Recog. Mark
Enter brightness and contrast of the fiducial mark for screen
recognition in the text boxes.
Make the ten-key window appear and enter values as
gain and level in the text boxes.
Gain : Amplification Factor used to change the contrast
The higher the gain is, the bigger the contrast becomes.
Level : Amplification Factor used to change the brightness
The higher the level is, the brighter the whole view
becomes.
*4 Scr. Camera PEC Mark
Enter brightness and contrast of the fiducial mark in the text
boxes.
Make the ten-key window appear and enter values as
gain and level in the text boxes.
Gain : Amplification Factor used to change the contrast
The higher the gain is, the bigger the contrast becomes.
Level : Amplification Factor used to change the brightness
The higher the level is, the brighter the whole view
becomes.
Tg0699-PM-D2
0207-001 Chapter 1 4-37
5. "File Operation" Submenu
5. "File Operation" Submenu
The displayed information is for passing or deleting the management
data between the hard disk (HD) in the machine and a floppy disk
(FD).
••
••
• Window Layout
When the [FILE OPN.] button included in the system setting
submenu bar, is pressed, the following submenu window appears.
Fig. 3D31
Open the cover on the lower section of the touch panel and insert a
floppy disk in the floppy disk drive.
••
••
• Window Composition
*1 Computer Name Display
The computer name in the machine is indicated.
*1*1
*4
*5 *2 *3