2OM-1088-002.pdf - 第222页
Tg0699-PM-D2 2.3 Error IDs and Remedial Procedures 0207-001 Chapter 2 2-17 T able 4B15 Error ID Item Description 0219000 T able Z Timing T ask has not been completed unable to continue. (Cause 1) Self-Diagnostics Error M…
Tg0699-PM-D2
2.3 Error IDs and Remedial Procedures
0207-001 Chapter 2 2-16
Table 4B14
Error ID Item Description
0217000 Table Z Interlock (-) Limit error has been detected.
(Cause 1) The table θ limit (-) photosensor (BPH213) is defective.
(Cause 2) The operation timing is shifted from the normal one.
(Cause 3) When this error occurs during a manual operation, it is not regarded as a
device error.
(Remedy 1) Check how the sensor is working in “Device Check” window (submenu).
When the sensor is not working, it is required to replace the sensor with
a new one. Contact our service personnel for details.
(Remedy 2) Shut off the power to the machine once and power up the machine again.
After that, re-start the operation.
When the same error still occurs, contact our service personnel for de-
tails.
(Remedy 3) Perform the zeroing operation and re-start the operation.
Tg0699-PM-D2
2.3 Error IDs and Remedial Procedures
0207-001 Chapter 2 2-17
Table 4B15
Error ID Item Description
0219000 Table Z Timing Task has not been completed unable to continue.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
If the machine is not reset to its normal condition, shut down the power of
the machine once and power up the machine again. After that, re-start
the operation.
When the same error still occurs, contact our service personnel for de-
tails.
0220000 Table Z Data The data was detected outside of the possible range.
(Cause 1) The specified data may have exceeded the movable range.
(Remedy 1) Check the parameters in the “Screen Distance” (“Pattern Program” win-
dow), “Screen Gap” (“OFFSET DATA” window), and “P.C.B. Transfer
Height” (“OFFSET DATA” window) text boxes.
0221000 Table Z Origin Zeroing Opn. Not Complete
(Cause 1) The motor axis was activated before the zeroing operation was completed.
(Remedy 1) Perform the zeroing operation.
Tg0699-PM-D2
2.3 Error IDs and Remedial Procedures
0207-001 Chapter 2 2-18
Table 4B16