2OM-1088-002.pdf - 第275页

Tg0699-PM-D2 2.3 Error IDs and Remedial Procedures 0207-001 Chapter 2 2-70 T able 4B68

Tg0699-PM-D2

2.3 Error IDs and Remedial Procedures

0207-001 Chapter 2 2-69

Table 4B67

Tg0699-PM-D2

2.3 Error IDs and Remedial Procedures

0207-001 Chapter 2 2-70

Table 4B68

Tg0699-PM-D2

2.3 Error IDs and Remedial Procedures

0207-001 Chapter 2 2-71

Table 4B69

Error ID Item Description

1403000 Printing Pressure Front squeegee printing pressure exceeded upper set range.

Setting

1404000 Printing Pressure Rear squeegee printing pressure exceeded upper set range.

Setting

(Cause 1) The feedback data is corrupted.

(Remedy 1) Press the [FeedBack DataClear] button in the "Printing Pressure" tab

sheet. (Vol.1, Chapter 2, Section 5, 2.5 "Printing Pressure" Tab)

1405000 Printing Pressure Printing pressure exceeded upper range.

Setting

(Cause 1) The output value of the load cell is abnormal.

(Remedy 1) Check for any foreign substances around the squeegee up/down cylin-

der and confirm that the squeegee is correctly installed.

When the same error still occurs, contact our service personnel for de-

tails.

1406000 Printing Pressure Printing pressure exceeded upper range. (Average Value)

Setting

(Cause 1) The printing pressure got out of the specified one during printing.

(Remedy 1) Check the parameter set in the "Average" text box of the "Printing Press.

Error Setting" group box in the "Operation Mode" tab sheet.

Increase the value when the threshold severer than required is specified.

(Target Value: 50N)

Check if the amount of the supplied solder paste is too much or not.

When the same error still occurs after the above-described checking,

contact our service personnel for details.

1407000 Printing Pressure Front squeegee pressure exceeded minimum limit.

Setting

1408000 Printing Pressure Rear squeegee pressure exceeded minimum limit.

Setting

(Cause 1) The feedback data is corrupted.

(Remedy 1) Press the [FeedBack DataClear] button in the "Printing Pressure" tab

sheet. (Vol.1, Chapter 2, Section 5, 2.5 "Printing Pressure" Tab)