2OM-1088-002.pdf - 第319页
Tg0699-PM-D2 2.1 Preparation for Cleaning T ools 0509-001 Chapter 3 1-3-1 • V acuum Cleaner If the suction hole of the vacuum cleaner is changed to a smaller one, some spots can be cleaned more easily . • Air Blow for Ca…
Tg0699-PM-D2
2. Preparation before Maintenance
2. Preparation before Maintenance
2.1 Preparation for Cleaning Tools
• Brush
Use a brush whose bristles do not come off if possible.
• Rag
Use a rag (cotton, etc.) which dose not produce as less waste
thread as possible. Otherwise, the machine will break down due to
the remaining waste thread.
A clean rag is also required, depending on the spots to be
cleaned.
• Oiled Rag
Use a rag (cotton, etc.) which dose not produce as less waste
thread as possible. Otherwise, the machine will break down due to
the remaining waste thread.
• Air Gun
Do not use the air gun for any spots other than the specified ones.
If dirt and dust are dispersed, they adhere to various sensores and
moving parts, causing the machine to break down.
0509-002 Chapter 3 1-3
Fig. 5A1 Air Gun
Tg0699-PM-D2
2.1 Preparation for Cleaning Tools
0509-001 Chapter 3 1-3-1
• Vacuum Cleaner
If the suction hole of the vacuum cleaner is changed to a smaller
one, some spots can be cleaned more easily.
• Air Blow for Camera
Use one on the market.
• Container, etc.
Use a container big enough to hold water drained from the air
regulator while cleaning the regulator.
• Industrial alcohol
Use the industrial alcohol described in Table 5A1 for the machine.
Table 5A1
Maker Product Name
DAN Chemical Co., Ltd Denatured Ethanol AP-7
Japan Alcohol Trading Co., Ltd SOLMIX AP-7
When the industrial alcohol in Table 5A1 is unavailable, follow the mixture
ratio in Table 5A1-1.
Table 5A1-1
Chemical Element CAS No. Mixture Ratio
Ethyl Alcohol 64-17-5 80 to 90%
Normal Propanol 71-23-8 5 to 10%
Isopropyl Alcohol 67-63-0 5% or less
Obtain the material safety data sheet (MSDS) from the maker to learn the
precautionary points on handling and check the contents described in detail
for correct use.
Tg0699-PM-D2
2.2 Preparation for Lubrications
0509-002 Chapter 3 1-4
2.2 Preparation for Lubrications
Prepare for the specified types of grease and lubrication tools.
Specified Greases
• DAPHNE EPONEX GREASE No. 1 (Idemitsu Kosan Co., Ltd.)
• MOLYNOC GREASE AP 1 (NIPPON OIL CORPORATION)
(a) Before lubrication, wipe off the old grease. Otherwise, the effect of
grease and oil will decrease.
(b) Obtain the material safety data sheet (MSDS) from the maker to
learn the precautionary points on handling and check the contents
described in detail for correct use.
Same Types of Lubricants
• DAPHNE EPONEX GREASE No. 1 (Idemitsu Kosan Co., Ltd.) or
its equivalent
• MOLYNOC GREASE AP 1 (NIPPON OIL CORPORATION) or its
equivalent
Note
Table 5A2
Table 5A2-1