2OM-1088-002.pdf - 第34页
Safe-21 Tg0698-PM-D1 Safety Precautions No. Alert Labels and Description (9) Description z Before the machine is powered, be sure to connect a ground wire correctly to avoid an electric shock. Imperfect grounding will ca…
Safe-20 Tg0698-PM-D1
Safety Precautions
0509-001
No. Alert Labels and Description
(6)
Description
z Only the person who has finished operator training in the operation and
maintenance of the machine should touch the machine. Otherwise, any person
other than the trained one will be given an electrical shock or suffer an injury or a
serious accident.
(7)
Description
z Pay attention to the moving mechanisms. Otherwise, part of your body may be
trapped in the moving mechanisms, causing an injury.
z When a door is opened or closed, be sure to hold the grip firmly and slowly move
the door up or down. Otherwise, your hand may be trapped in the door, causing an
injury.
(8)
Description
z Be sure to tighten the cap of the solvent tank firmly. Do not open the cap while the
machine is running.
Otherwise, the solvent (alcohol, etc.) may disperse and get into your eyes, causing
an injury to them.
Safe-21 Tg0698-PM-D1
Safety Precautions
No. Alert Labels and Description
(9)
Description
z Before the machine is powered, be sure to connect a ground wire correctly to avoid
an electric shock.
Imperfect grounding will cause an electric shock.
(10)
Description
z Pay attention to the moving mechanisms. Otherwise, part of your body may be
trapped in the moving mechanisms.
0509-001
WARNING
WARNING
High Leakage Current!
Earth Connection Essential
before Connecting Supply
Safe-22 Tg0698-PM-D1
Safety Precautions
5. Precautionary Items for Correct Operations
Requirements for Installation
Be sure to fulfill the following requirements for safety purposes.
• Overvoltage Category : Category III
• Pollution Degree : 3
z Overvoltage Categories refer to the level of Impulse Withstand Voltage protection
provided at the specified Pollution Degree.
Category III : Primary circuits of a device to which power is directly
supplied from the power distribution panel, and circuits from
the distribution panel to outlets.
The term was changed from "Installation Category" to "Overvoltage
Category".
z "Pollution Degree" is a degree of pollution severity.
Pollution Degree 3: Conductive pollution or dry nonconductive pollution
that becomes conductive due to condensation occurs. To
be found in industrial environment or construction sites
(harsh environments).
Note
0509-001