2OM-1088-002.pdf - 第376页
Tg0699-PM-D2 0509-002 Chapter 3 1-55 12.3 Cleaning Consumables One of the sizes (width: 280 mm, 350 mm or 465 mm) can be se- lected for both cleaning paper and roller shaft (cylindrical device to take up the cleaning pap…
Tg0699-PM-D2
0509-001 Chapter 3 1-54-1
12.2 Checking of Industrial Alcohol Hose and Joints
Check for industrial alcohol leakage from the hose (including the joints)
running between the solvent tank and the cleaning nozzle.
Check the following:
• Industrial Alcohol Leakage
• Loosened or Deteriorated Hose Joints and Gaskets
• Cracks or Any Other Deterioration in Hose
Be sure to always perform this checking before starting the operation of
the machine and after completing a setup operation.
• Whenever an industrial alcohol leakage is found, turn off the power
switch of the machine immediately.
• When it is impossible to track down the cause of a leakage or repair
the leaking area on the customer side, contact the marketing
department or sales agency of Hitachi High-Technologies.
It may be difficult to detect a leakage because industrial alcohol is a
volatile liquid.
Try to carefully examine the area around the joints, etc., for any
trace of leakage.
CAUTION
12.2 Checking of Industrial Alcohol Hose and Joints
Tg0699-PM-D2
0509-002 Chapter 3 1-55
12.3 Cleaning Consumables
One of the sizes (width: 280 mm, 350 mm or 465 mm) can be se-
lected for both cleaning paper and roller shaft (cylindrical device to
take up the cleaning paper) on the customer side and the selected
pair is factory-assembled upon shipment of the machine.
Consult the marketing department or sales agency of Hitachi High-
Technologies for the detailed information on which pair of cleaning
paper and roller shaft is required.
12.3 Cleaning Consumables
Part No.
630 091 1619
630 091 1633
630 116 8050
-
Type No.
TS507 Width: 280mm, Diameter: φ100mm
TS507 Width: 350mm, Diameter: φ100mm
TS507 Width: 465mm, Diameter: φ100mm
Industrial Alcohol (Solvent)
Cleaning Paper
Cleaning Paper
Solvent
Q’ty
1
1
1
-
Table 5A10
Tg0699-PM-D2
0207-001 Chapter 3 1-56
13. Cleaning Unit Cleaning Procedure
When the "PRODUCT CHG." button is pressed on the "AUTO OPN."
submenu bar, the following tab sheet appears.
Fig. 5A85
Operation Procedure
(1) Press the "Cleang Chg." tab.
(2) Press the [Squeegee Chg. Pos. Move [START] ] button. The
background color turns blue.
Fig. 5A86
13. Cleaning Unit Cleaning Procedure