2OM-1088-002.pdf - 第57页
Tg0699-PM-D2 1.2 Offset Data 0207-001 Chapter 1 1-6 1.2.8 Auto Stop T able 3A9 Data Item Referential Items Hand Cleaning Stop (PCB) (1) in 1.2.8 of Section 2 Hand Cleaning Stop (CLNG.) (2) in 1.2.8 of Section 2 Solvent E…
Tg0699-PM-D2
1.2 Offset Data
0207-001 Chapter 1 1-5
1.2.4 P.E.C. Recognition
Table 3A5
Data Item Referential Items
P.E.C. Recognition Function (1) in 1.2.4 of Section 2
Center Recognition (2) in 1.2.4 of Section 2
Fiducial Mark #1 (3) in 1.2.4 of Section 2
Fiducial Mark #2 (4) in 1.2.4 of Section 2
Recognition Adjustment Correction (5) in 1.2.4 of Section 2
Recognition Adjustment Point X and Y (6) in 1.2.4 of Section 2
1.2.5 Screen Recognition
Table 3A6
Data Item Referential Items
Screen Recognition Function (1) in 1.2.5 of Section 2
Center Recognition (2) in 1.2.5 of Section 2
Fiducial Mark #1 (3) in 1.2.5 of Section 2
Fiducial Mark #2 (4) in 1.2.5 of Section 2
1.2.6 Mark Data
Table 3A7
Data Item Referential Items
Code (1) in 1.2.6 of Section 2
Figure (2) in 1.2.6 of Section 2
Size D1, Size D2 (3) in 1.2.6 of Section 2
Recognition Area (4) in 1.2.6 of Section 2
Polarity (5) in 1.2.6 of Section 2
Level (6) in 1.2.6 of Section 2
Lighting (7) in 1.2.6 of Section 2
1.2.7 Setup Data
Table 3A8
Data Item Referential Items
All Conveyor Setup (1) in 1.2.7 of Section 2
Two Camera Auto Calibration (2) in 1.2.7 of Section 2
Screen Recognition (3) in 1.2.7 of Section 2
Tg0699-PM-D2
1.2 Offset Data
0207-001 Chapter 1 1-6
1.2.8 Auto Stop
Table 3A9
Data Item Referential Items
Hand Cleaning Stop (PCB) (1) in 1.2.8 of Section 2
Hand Cleaning Stop (CLNG.) (2) in 1.2.8 of Section 2
Solvent Empty Stop (CLNG.) (3) in 1.2.8 of Section 2
Paste Supply Interval Mode (4) in 1.2.8 of Section 2
Paste Empty Stop (PCB) (5) in 1.2.8 of Section 2
Paste Detection (Option) (6) in 1.2.8 of Section 2
1.2.9 Cleaning
Table 3A10
Data Item Referential Items
Cleaning Area (1) in 1.2.9 of Section 2
Cleaning Interval (2) in 1.2.9 of Section 2
Mode (3) in 1.2.9 of Section 2
Cleaning Speed [mm/sec] (4) in 1.2.9 of Section 2
Paper Feed Pitch [mm] (5) in 1.2.9 of Section 2
Solvent Dispense Time [Sec] (6) in 1.2.9 of Section 2
Tg0699-PM-D2
0207-001 Chapter 1 1-7
1.3 Various Data
1.3 Various Data
The following data is required for printing in addition to the pattern
program.
Fig. 3A2
1.3.1 Management Data
The management data is composed of the following data.
Refer to "Section 3 Menus for Management Data" for details.
Table 3A11
Data Item Referential Items
Management Data 1 2 in Section 3
Management Data 2 2 in Section 3
Program Management Data 3 in Section 3
File Operation 4 in Section 3
1.3.2 Machine Set-Up
The machine set-up data is composed of the following data.
Refer to "2. "Machine Set-Up" Submenu" in "Section 4 Menus for
System Setting" for details.
Table 3A12
Data Item Referential Items
Password 2.1 in Section 4
Tower Lamp/Buzzer 2.2 in Section 4
Display 2.3 in Section 4
Date/Time 2.4 in Section 4