2OM-1088-002.pdf - 第87页

Tg0699-PM-D2 (5) Paper Feed Pitch Set the pitch at which the cleaning paper should be fed for cleaning of the underside. Unit : mm Data Input Range: 0 to 45 (6) Solv . Dispense Time Set the solvent dispensing time for we…

Tg0699-PM-D2

1.2.9 Cleaning

(1) Cleaning Area

Set offset values as a cleaning area based on the end plane of

the P.C.B. in the Y direction.

Unit : mm

The default values are "-010 mm" for "Origin" and

"+000 mm" for "Depth". A wide area will be cleaned in

both directions (10 mm on one side) based on the Y

direction of the P.C.B.

(2) Cleaning Interval

Set the number of P.C.B.’s to be printed as a cycle for auto-

matic cleaning.

Every time the number of printed P.C.B.’s reaches the speci-

fied one (cycle), the machine automatically performs a clean-

ing operation once.

(3) Option Mode

1 (For.), 2 (Back), 3 (For.), 4 (Back)

Select a wiping mode based on the number of each screen

movement.

NO WIPE : The underside of the screen is not wiped

DRY : Solvent is not discharged and the underside of

the screen is wiped with cleaning paper. (Dry

Paper)

WET : The underside of the screen is woped with

cleaning paper while solvent is being dis-

charged. (Wet Paper)

VAC.+DRY : The underside of the screen is wiped with dry

paper while the solder paste on the underside is

being sucked.

VAC.+WET : The underside of the screen is wiped with wet

pa-per while the solder paste on the underside

is being sucked.

(4) Cleaning Speed

Set the speed at which the screen should be moved for auto-

matic cleaning of the underside.

Unit : mm/sec

Data Input Range: 10 to 100

Cleaning Speed [mm/sec]

050

Fig.3B64

1 (For.)

2 (Back)

VAC.+DRY

VAC.+WET

3 (For.)

WET

Fig.3B63

4 (Back)

WET

Cleaning Interval

Fig.3B62

Origin

Depth

-010

+010

Fig.3B61

0207-001 Chapter 1 2-27

1.2 Operation Data

Tg0699-PM-D2

(5) Paper Feed Pitch

Set the pitch at which the cleaning paper should be fed for

cleaning of the underside.

Unit : mm

Data Input Range: 0 to 45

(6) Solv. Dispense Time

Set the solvent dispensing time for wet-type cleaning.

Unit : seconds

Data Input Range: 0.1 to 2.0

Paper Feed Pitch [mm]

Fig.3B65

Solv. Dispense Time [sec]

1.0

Fig.3B66

0207-001 Chapter 1 2-28

1.2 Operation Data

Tg0699-PM-D2

2. "Pattern Program" Edit Window

0207-001 Chapter 1 2-29

2. "Pattern Program" Edit Window

2.1 Navigations in Window

2.1.1 Opening the Window

This session describes how to open the "Pattern Program" edit

window.

The "Pattern Program" edit window can also be opened by

selecting the [RECOVERY] submenu in the [Auto Operation]

menu.

••

• Operation Procedure

(1) Press the [DATA EDIT] button on the main menu bar. The fol-

lowing initial "Pattern Program" window opens.

Fig. 3B73 Initial "Pattern Program" Window