2OM-1088-002.pdf - 第97页

Tg0699-PM-D2 2.1 Navigations in Window 0207-001 Chapter 1 2-38 (4) Selection of Set V alue A combo box is like a text box and a list box combined and pro- vided to make it easier to select a specific value from a list of…

Tg0699-PM-D2

0207-001 Chapter 1 2-37

2.1 Navigations in Window

(2) Entry of Numerical Values

When the "Tenkey" icon on the toolbar is pressed, the

following ten-key window appears.

Fig. 3B78 Ten-key Window

Fig. 3B79 Virtual Keyboard (Alphabet Keyboard )

Use the alphabetic keys to enter a parameter and press the

[Enter] key.

When you double-push a text box quickly in which a numerical

value should be entered, the parameter in the text box is high-

lighted, indicating that a numerical value should be entered.

Enter a value, using the number keys on the ten-key window

and press the [Ent] key.

(3) Entry of Alphabetic Characters

When a pattern program must be loaded or saved or a file name

must be entered, the following virtual keyboard (Alphabet Key-

board) appears.

Tg0699-PM-D2

2.1 Navigations in Window

0207-001 Chapter 1 2-38

(4) Selection of Set Value

A combo box is like a text box and a list box combined and pro-

vided to make it easier to select a specific value from a list of

pre-defined values.

Step 1

When you double-push a text box quickly, the text box is

changed to a combo box that has a down arrow on the right

side.

Fig. 3B80

Step 2

When you push the down arrow, a drop-down list box opens,

showing the rows of data to be selected.

Fig. 3B81

Step 3

When you push the desired data in the list, it is reflected in the

text box.

Fig. 3B82

When too many options are in the list box, a scrollbar appears

on the right side of the list box. Scroll the list and select the

desired option.

Fig. 3B83

Step 4

When another text box is selected, the combo box is changed to

a text box.

Scrollbar

Tg0699-PM-D2

2.1 Navigations in Window

0207-001 Chapter 1 2-39

2.1.3 Saving a Pattern Program

This session describes how to save a newly created or an edited

pattern program.

• Operation Procedure

(1) Click "File" on the menu bar. The pull-down menu opens. Select

"Save" or "Save As..." from the pull-down menu.

Save : Select this to replace the source pattern program

with the edited one.

Save As... : Select this to save a newly created pattern pro-

gram or an edited pattern program as another one

(different from the source program).

(2) When you select "Save", the active pattern program is saved

with the same name (model name) as that of the source pattern

pro-gram. The source pattern program is replaced with the

active one.

When the program is saved, a "File save complete" message

ap-pears on the status bar of the "Pattern Program" window.

(3) When you select "Save As...", the "Virtual Keyboard" (Fig. 3B79)

and the following "Save" window open.

Fig. 3B84 "Save" Window

(4) Enter a comment (up to 16 characters) on the selected program

in the "Comment 1" and "Comment 2" text boxes and the pro-

gram name (up to 24 characters) in the "Program Name" text

box, using the "Virtual Keyboard" .