00198442-04_UM_TX-V2_EN - 第103页
Instruction manual SIPLACE TX 3 Technical data and assemblies From software version 714.0 12/2020 3.1 Performance data 103 3 T echnical dat a and assemblies 3.1 Performance dat a 3.1.1 Definition of placemen t performanc…
2 Operational safety Instruction manual SIPLACE TX
2.9 ESD guidelines From software version 714.0 12/2020
102
Do not move the assemblies near to data view devices, monitors or television units. Keep a min-
imum distance of > 10 cm to monitors.
2.9.4 Measurements and modifications to ESD modules
Do not take measurements on the modules unless the following conditions are fulfilled:
– the measuring device is earthed (e.g. via PE conductors) or
– you discharge the measuring head just before taking measurements with a potential-free
measuring device (e.g. by touching an unpainted metal part of the controller casing).
Always use an earthed soldering iron if you carry out any soldering work.
2.9.5 Dispatching ESD modules
Always store modules and components in conductive packaging (e.g. metallized plastic bags
or metal sleeves) and dispatch them in conductive packaging.
If the packaging is not conductive, place the modules in a conductive envelope before pack-
aging. Use conductive expanded rubber, ESD bags, domestic aluminum foil or paper, for ex-
ample. NEVER use plastic bags or film. 2
If the module has integral batteries, ensure that the conductive packaging does not touch or
short-circuit the battery terminals and, if necessary, first cover the terminals with insulating
tape or material.
Instruction manual SIPLACE TX 3 Technical data and assemblies
From software version 714.0 12/2020 3.1 Performance data
103
3 Technical data and assemblies
3.1 Performance data
3.1.1 Definition of placement performance
The placement performance is influenced by the different head combinations and head positions,
plus the conveyor configurations. Individual options and customized applications also influence
the placement performance. On request, SIPLACE can calculate the actual performance of your
product on your placement machine configuration.
IPC value [components/h]
Performed with 0402 components in accordance with the layout of the IPC 9850 standard from
the Association of Connecting Electronics Industries.
SIPLACE benchmark value [components/h]
The SIPLACE benchmark value fulfills the requirements in the SIPLACE scope of delivery and
performance.
3 Technical data and assemblies Instruction manual SIPLACE TX
3.1 Performance data From software version 714.0 12/2020
104
3.1.2 Machine performance SIPLACE TX
3
Placement head types SIPLACE SpeedStar (C&P20 P2)
SIPLACE MultiStar (CPP)
SIPLACE TwinStar (TH)
Placement performance
The placement performance is influenced by the different head combinations and head positions, plus the conveyor
configurations. Individual options and customized applications also influence the placement performance. On request,
ASM can calculate the actual performance of your product on your machine configuration.
IPC value [components/h]
Conducted with 0201 components, in accordance with the layout of the IPC 9850 standard of Association Connecting
Electronics Industries.
SIPLACE benchmark value [components/h]
The SIPLACE benchmark value fulfills the requirements in the ASM scope of delivery and performance.
SIPLACE TX2i placement machine Placement area IPC value Benchmark value
Standard C&P20 P2 / C&P20 P2 79,000 96,000
CPP_L/CPP_L 46,000 51,000
SIPLACE TX2 placement machine Placement area IPC value Benchmark value
Standard C&P20 P2 / C&P20 P2 72,300 85,500
C&P20 P2 / CPP_L 57,800 66,600
CPP_L/CPP_L 43,300 47,700
CPP_H / CPP_H 40,800 44,700
TH / CPP_H 25,500 29,000
SIPLACE TX1 placement machine Placement area IPC value Benchmark value
Standard C&P20 P2 36,100 44,000
CPP_H 20,500 22,500
TH 5,050 5,500
CPP_H = Multistar CPP in high assembly position
CPP_L = Multistar CPP in low assembly position