00198442-04_UM_TX-V2_EN - 第14页
Contents Instruction manual SIPLACE TX From software version 714.0 12/2020 14
Instruction manual SIPLACE TX Contents
From software version 714.0 12/2020
13
8 Annex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
8.1 EC Declaration of Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
8.1.1 SIPLACE TX1 (588301) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306
8.1.2 SIPLACE TX2 (588302) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
8.1.3 SIPLACE TX2i (588300) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310
8.1.4 SIPLACE TX2 m (588520) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312
8.1.5 SIPLACE TX2i m (588525) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
8.1.6 SIPLACE TX2i m 4mm (588526) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
Contents Instruction manual SIPLACE TX
From software version 714.0 12/2020
14
Instruction manual SIPLACE TX 1 Introduction
From software version 714.0 12/2020
15
1 Introduction
This instruction manual is a guide or reference work for operating and setting up the SIPLACE
®
TX Edition V2 placement machines.
The SIPLACE TX Edition V2 placement machines are available in six different variants:
– SIPLACE TX1
– SIPLACE TX2
– SIPLACE TX2i
– SIPLACE TX2 m
– SIPLACE TX2i m
– SIPLACE TX2i m 4 mm
The numbers in the type name indicate the number of gantries used. Each gantry has one place-
ment head. The term m stands for enhanced placement accuracy of 15 µm, 20 µm or 25 µm
1
The header of each chapter contains the release and software version, to which this manual ap-
plies.
PLEASE NOTE
The SIPLACE TX Edition V2 placement machines are of largely identical design. Any dif-
ferences will be mentioned specifically.
For information about the relevant configurations and options, please refer to the
specification documentation for the SIPLACE TX or SIPLACE TX m.
The diagrams in this instruction manual show the SIPLACE TX2. These diagrams also
apply in principle to the SIPLACE TX1, TX2i or SIPLACE TX m. Additional diagrams will
be shown for any deviations.