00198442-04_UM_TX-V2_EN - 第17页

Instruction manual SIPLACE TX 1 Introduction From software version 714.0 12/2020 1.1 Important notes on the in struction manual 17 1.1.4 Revision t able 1 1.1.5 Further information about and content s of the document ati…

1 Introduction Instruction manual SIPLACE TX

1.1 Important notes on the instruction manual From software version 714.0 12/2020

1.1 Important notes on the instruction manual

1.1.1 Contents and filing of the instruction manual

This instruction manual contains basic information that must be observed when setting up, oper-

ating and maintaining the placement machine. The service engineers, qualified staff, operators

and users plus system owner must therefore read it before commencing installation and commis-

sioning. The instructions must be kept permanently accessible where the placement machine is

used.

In addition, the user must ensure that the employees have fully understood the contents of the

instruction manual.

1.1.2 Danger notes

1.1.3 Manufacturer's/supplier's liability

We hereby confirm that the contents of this instruction manual are of a descriptive and explanatory

nature only and do not contain any contractual conditions or guaranties. The liability and obliga-

tions assumed by ASM Assembly Systems GmbH&Co.KG can be found exclusively in the rele-

vant contract agreement concerning the supply of the placement machine described in this

manual. This applies in particular to all statements regarding performance or service life and the

agreed liability for faults or defects. The provisions of the contract regarding the liability for faults

or defect are neither extended nor restricted by any statements in this instruction manual.

WARNING

Read the instruction manual!

 Tasks may only be performed by qualified staff who have completed the relevant

training.

 Only perform tasks on the placement machine if you have precise knowledge of the

relevant section in the instruction manual.

 Observe all warnings, caution notes and hazard notes.

 Please also read chapter 2 of this instruction manual through carefully.

Instruction manual SIPLACE TX 1 Introduction

From software version 714.0 12/2020 1.1 Important notes on the instruction manual

1.1.4 Revision table

1.1.5 Further information about and contents of the documentation package

1.1.5.1 How to get information

If you have any further questions concerning this manual or if you would like additional information

on a particular topic, please get in touch with your local SIPLACE dealer or contact us directly at:

ASM Assembly Systems GmbH&Co.KG

Rupert-Mayer-Str. 44

81379 Munich 1

Edition Amendments

04/2018 First edition

12/2019 – Station software SC.713.0

– New mains power connection

– New warning labels and signs for China

– Formal adjustments, minor corrections and supplements

05/2020 – Station software SC.713.1

– SIPLACE TX2i m

– EC Declaration of Conformity for individual machine variants

– Formal adjustments, minor corrections and supplements

12/2020 – Station software SC.714.0

– SIPLACE TX2 m

– SIPLACE TX2i m 4 mm

– Formal adjustments, minor corrections and supplements

– New PCB camera, type 54

1 Introduction Instruction manual SIPLACE TX

1.1 Important notes on the instruction manual From software version 714.0 12/2020

1.1.5.2 SIPLACE on the World Wide Web (WWW)

We also have our own site on the Internet. Why not log into our homepage at http://www.asm-smt-

solutions.com.

All the menus and other information are available in two languages: You can choose between the

German and English versions.

The various headings contain information on

– Our products

– Services

– Contacts, etc.

Registered customers can also access the SIPLACE User Group. There you can call up special

information on our placement machines, such as

– Technical documentation

– Technical information

– Spare parts catalogs etc.

Registering for access to the User Group is easy:

 Click on ’Register now’.

 Complete the registration form and just send it off.

You will then quickly receive access authorization with USER ID and a password.

1.1.6 Abbreviations

A-Placement Alternating Placement

PA Placement area

CO Component

C&P20 P2 High-performance Collect&Place head with 20 segments, SIPLACE SpeedStar

C&P20 M3 High-resolution Collect&Place head with 20 segments, SIPLACE SpeedStar

CPP Collect&Place head, SIPLACE MultiStar

DCA Direct chip attach

DC Dual conveyor

EDIF Energy and data interface

ESD Electrostatically-sensitive group of components

EMC Electromagnetic compatibility

ESD Electrostatic sensitive device

FC Flip chip