00198442-04_UM_TX-V2_EN - 第20页
1 Introduction Instruction manual SIPLACE TX 1.2 Overview From software version 714.0 12/2020 20 1.2 Overview 1.2.1 SIPLACE TX 1/TX2 1 Fig. 1.2 - 1 SIPLACE TX1/2 placement machine (T) Direction of travel (1) Location 1 -…
Instruction manual SIPLACE TX 1 Introduction
From software version 714.0 12/2020 1.1 Important notes on the instruction manual
19
WT Waffle pack tray
WTC Waffle pack tray carrier
MGCU Modular Gantry Control Unit
GND Ground
MHCU Modular Head Control Unit
I-Placement Independent placement
JTF-ML JEDEC Tray Feeder
PCB Printed circuit board
MCS Machine capability study
P&P Pick&Place
P&P1 Pick&Place module 1
P&P2 Pick&Place module 2
NC Nozzle changer
SMD Surface mounted device
SC Station computer
TH Twin Pick&Place head, SIPLACE TwinStar
VS Vision system
1 Introduction Instruction manual SIPLACE TX
1.2 Overview From software version 714.0 12/2020
20
1.2 Overview
1.2.1 SIPLACE TX1/TX2
1
Fig. 1.2 - 1 SIPLACE TX1/2 placement machine
(T) Direction of travel
(1) Location 1 - outer
(2) Location 2 - inner
(1)
(2)
Instruction manual SIPLACE TX 1 Introduction
From software version 714.0 12/2020 1.2 Overview
21
1.2.2 SIPLACE TX2i
1
Fig. 1.2 - 2 SIPLACE TX2i placement machine - location 2 inner
(T) Direction of travel
(1) Location 1 - innermost position
(2) Location 2 - innermost position
(1)
(2)