00198442-04_UM_TX-V2_EN - 第216页

4 Setting up and commissioning In struction manual SIPLACE TX 4.7 Commissioning the placement m achine From software version 71 4.0 12/2020 216 4.7.3 Instructing the customer's personnel  Explain all customer-speci…

Instruction manual SIPLACE TX 4 Setting up and commissioning

From software version 714.0 12/2020 4.7 Commissioning the placement machine

215

Fig. 4.7 - 2 Service tools => automatic calibration => calibrating the gantry axes

The following calibration steps are enabled:

– 1. Travel range

– 3. System identification

– 4. Parameterization X axis

 Click on Next (1).

The calibration must be completed without errors.

(1)

4 Setting up and commissioning Instruction manual SIPLACE TX

4.7 Commissioning the placement machine From software version 714.0 12/2020

216

4.7.3 Instructing the customer's personnel

 Explain all customer-specific installed options, in particular software / software compatibility.

 Explain the programming of SIPLACE Pro editors.

 Instruct the operators and line engineers in using the station software.

 Explain about password protection.

 Instruct the customer's personnel according to the instruction manual and the preventive

maintenance.

4.7.4 A test run or starting production

 Test the line using the test PCB or a PCB provided by the customer.

 Record the customer product and performance data, prepare the data and document the data

in the installation report.

 Secure the data and give the customer security copies.

Instruction manual SIPLACE TX 5 Tasks at the placement machine

From software version 714.0 12/2020 5.1 Staff profiles

217

5 Tasks at the placement machine

This chapter contains a number of subjects that are intended to help you during your daily work

on a SIPLACE line. For example, you are provided with preventative measures that you can take

to minimize the downtime on the placement machine to obtain the highest possible level of effi-

ciency for the SIPLACE line during production.

5.1 Staff profiles

Certain functions or menus may only be executed or can only accessed by specially trained per-

sonnel. A differentiation is made between the following operator levels:

– Production

– Advanced production

– Service (customer)

The operator levels "Advanced production" and "Service (customer)" can be password protected.

PLEASE NOTE

Proper usage by qualified personnel

Incorrect usage poses a risk to life and limb and a risk of damage to equipment.

 Only appropriately qualified personnel may put the placement machine into opera-

tion, operate it or perform work to the placement machine. You will find further infor-

mation about this in section 1.5.4

, page 30.

 Evidence of these qualifications must be obtained in training or instructions of per-

sonnel. These instructions must be given by personnel trained and authorized by SI-

PLACE. For an overview of the training courses, refer to section 1.6

, page 32.