00198442-04_UM_TX-V2_EN - 第28页
1 Introduction Instruction manual SIPLACE TX 1.5 Machine description From software version 714.0 12/2020 28 1.5 Machine description 1.5.1 Placement machine serial number The seria l number o f the machin e can be f ound …
Instruction manual SIPLACE TX 1 Introduction
From software version 714.0 12/2020 1.4 SIPLACE TX m
27
1
Fig. 1.4 - 2 Vacuum tooling with additional fiducial rail on dual conveyor
(1) Additional fiducial rail for lane 1 in X direction
(2) Vacuum tooling on lane 1
(3) Vacuum tooling on lane 2
(4) Additional fiducial rail for lane 2 in X direction
(5) Fixture of additional fiducial rail to machine frame
(6) Fiducial rail on the vacuum tooling along the Y axis
(2)
(4)
(3)
(1)
(5)
(5)
(T2)
(T1)
(6)
(6)
(6)
(6)
1 Introduction Instruction manual SIPLACE TX
1.5 Machine description From software version 714.0 12/2020
28
1.5 Machine description
1.5.1 Placement machine serial number
The serial number of the machine can be found on the typeplate, on the inside of the placement
machine frame at location 1.
1
Fig. 1.5 - 1 Position of typeplate with serial number
(T) Direction of travel
(1) Typeplate
(1)
Instruction manual SIPLACE TX 1 Introduction
From software version 714.0 12/2020 1.5 Machine description
29
1
1.5.2 EC Declaration of conformity
The product described in this instruction manual is in accordance with the regulations and stan-
dards of the respective EC Declaration of Conformity. See also section 8.1
, on page 305).
1.5.3 Use as prescribed
The product may only be used for the areas of application specified in the catalogues and techni-
cal descriptions i.e. for the placement of SMD components and may only be used together with
the third party devices and components recommended or approved by ASM Assembly Systems
GmbH & Co. KG. Use for a different or extended purpose is not prescribed.
In the case of incorrect usage, ASM Assembly Systems GmbH & Co. KG will not assume liability
for any damage which occurs and will not guarantee the correct and proper function of machine
components.
Use as prescribed also includes compliance with all the instructions in the instruction manual.
For the product to operate correctly and reliably, it must have been transported, stored, erected
and assembled correctly and must be operated and maintained with care.
PLEASE NOTE
Electrical ratings on the typeplate
The electrical ratings on the typeplate are maximum values. The electrical power actually
consumed depends on the placement machine configuration and the placement pro-
gram.