00198442-04_UM_TX-V2_EN - 第61页

Instruction manual SIPLACE TX 2 Operational safety From software version 714.0 12/2020 2.2 Warning labels 61 2.2.9 W arning labels on the SIPLACE MultiSt ar CPP / CPP M 2 Fig. 2.2 - 1 1 Warning labels on the SIPLACE Mult…

100%1 / 330
2 Operational safety Instruction manual SIPLACE TX
2.2 Warning labels From software version 714.0 12/2020
60
2.2.8.1 High temperatures on the SIPLACE C&P20 M3
1 in fig. 2.2 - 10
, page 59
(Quantity per SIPLACE C&P20 M3: 1)
2.2.8.2 Laser class 2 on the component sensor
2
Item W laser class 2 in fig. 2.2 - 10, page 59, item no. 03155298-01 2
(Quantity per C&P20 M3: 1) 2
2.2.8.3 Risk group 2 for cameras with ultra-bright blue LEDs
Item 4 in fig. 2.2 - 10, page 59,
(Quantity per C&P20 M3: 1)
2
2
2
High temperatures on the SIPLACE C&P20 P2 during continuous
operation
Risk of burns due to high temperatures!
The housing of the star motor and the handle on the placement head
may become very hot during continuous operation and in ambient
temperature in excess of 22 °C.
Be careful when touching the parts.
2
2
2
LASER RADIATION
Laser class 2
Acc. to IEC 60825-1:2014
Do not look into beam!
2
Risk group 2
The beam from cameras with ultra-bright blue LEDs can be a haz-
ard.
Do not look into the beam of the ready-for-operation camera!
Instruction manual SIPLACE TX 2 Operational safety
From software version 714.0 12/2020 2.2 Warning labels
61
2.2.9 Warning labels on the SIPLACE MultiStar CPP / CPP M
2
Fig. 2.2 - 11 Warning labels on the SIPLACE MultiStar CPP / CPP M
(1) Temperature label, item no. 03031926-01
Item laser mark - risk class 2, item no. 03155298-xx
(1)
Laser mark, risk class
2 Operational safety Instruction manual SIPLACE TX
2.2 Warning labels From software version 714.0 12/2020
62
2.2.9.1 High Temperatures on the SIPLACE CPP / CPP M
1 in fig. 2.2 - 11
, page 61
(quantity per SIPLACE CPP / CPP M: 1)
2.2.9.2 Laser mark - risk class 2 at component sensor
2
Item laser mark - risk class 2 in fig. 2.2 - 11, page 61, item no. 03134118-01
(quantity per SIPLACE CPP / CPP M: 1)
2
2
2
High temperatures at the SIPLACE CPP during continuous opera-
tions
Risk of burns due to high temperatures!
The Z drive (linear motor) can develop high surface temperatures
during continuous operation, if the ambient temperature is greater
than 22°C.
Be careful when touching the parts.
2
LASER RADIATION
Risk class 2
Acc. to IEC 60825-1:2014
Do not look into beam!