00198442-04_UM_TX-V2_EN - 第62页

2 Operational safety Instruction manual SIPLACE TX 2.2 Warning labels From software version 714.0 12/2020 62 2.2.9.1 High T emperatures on the SIPLACE CPP / CPP M 1 in fig. 2.2 - 1 1 , p age 61 (quantity per SIPLACE CPP …

100%1 / 330
Instruction manual SIPLACE TX 2 Operational safety
From software version 714.0 12/2020 2.2 Warning labels
61
2.2.9 Warning labels on the SIPLACE MultiStar CPP / CPP M
2
Fig. 2.2 - 11 Warning labels on the SIPLACE MultiStar CPP / CPP M
(1) Temperature label, item no. 03031926-01
Item laser mark - risk class 2, item no. 03155298-xx
(1)
Laser mark, risk class
2 Operational safety Instruction manual SIPLACE TX
2.2 Warning labels From software version 714.0 12/2020
62
2.2.9.1 High Temperatures on the SIPLACE CPP / CPP M
1 in fig. 2.2 - 11
, page 61
(quantity per SIPLACE CPP / CPP M: 1)
2.2.9.2 Laser mark - risk class 2 at component sensor
2
Item laser mark - risk class 2 in fig. 2.2 - 11, page 61, item no. 03134118-01
(quantity per SIPLACE CPP / CPP M: 1)
2
2
2
High temperatures at the SIPLACE CPP during continuous opera-
tions
Risk of burns due to high temperatures!
The Z drive (linear motor) can develop high surface temperatures
during continuous operation, if the ambient temperature is greater
than 22°C.
Be careful when touching the parts.
2
LASER RADIATION
Risk class 2
Acc. to IEC 60825-1:2014
Do not look into beam!
Instruction manual SIPLACE TX 2 Operational safety
From software version 714.0 12/2020 2.2 Warning labels
63
2.2.10 Warning label W 205 on tape cutter
2
Fig. 2.2 - 12 Warning label on the top of tape cutter
Item W 205, item no. 03009344-01
2
2
2
WARNING
Risk of cuts
Risk of cuts from sharp blades when working on the tape cutter!
Wear robust protective gloves when working on the tape cutter.
WARNING
Risk of injuries
Risk of injuries from pressurized compressed-air lines when working on the tape cutter.
Disconnect the placement machine from the mains supply and the compressed air
supply, before you start work on the tape cutter.
Wait until the operating pressure has dropped to 0 MPa.
W 205