00191369-01 - 第106页
3 Introduction and Basic Concepts User’ s M anual SIPLACE HS -50 3.2 Principles of the Graphic User I nterface Software Version SR.501.xx Edition 01/99 104 Å Check the box " Abort pr ocessing PCB" if the PCB is…
User’s Manual SIPLACE HS-50 3 Introduction and Basic Concepts
Software Version SR.501.xx Edition 01/99 3.2 Principles of the Graphic User Interface
103
$ ERUWSURFHVVLQJ
Å Click the corresponding PCB icon .
If the PCB is located on processing conveyor 2, the following dialog box is opened.
Å Click the checkbox "Abort processing PCB".
Å Click the $FFHSW button.
Processing of the PCB is aborted.
The incompletely assembled PCB is transported to the output conveyor and the operator
is requested to remove it by hand.
If the PCB is located on processing conveyor 1, the following dialog box is opened.
3 Introduction and Basic Concepts User’s Manual SIPLACE HS-50
3.2 Principles of the Graphic User Interface Software Version SR.501.xx Edition 01/99
104
Å Check the box "Abort processing PCB" if the PCB is to be transported to the output
conveyor without further processing.
Å Check the box "PCB not to be assembled in PA2" if the PCB is to be processed on
processing conveyor 1 and is then to be transported to the output conveyor without being
processed on processing conveyor 2.
Å Click the $FFHSW button.
If the PCB is located on the input conveyor, the following dialog box is opened.
Å Check the box "Abort processing PCB" if the PCB is to be transported to the output
conveyor without further processing.
Å Check the box "PCB not to be assembled in PA2" if the PCB is to be processed on
processing conveyor 1 only and is then to be transported to the output conveyor without
being processed on processing conveyor 2.
Å Check the box "PCB not to be assembled in PA1" if the PCB is to be transported through
processing conveyor 1 without being processed and is then to be processed on processing
conveyor 2.
Å Click the $FFHSW button.
3URFHVVLQJRI3&%DERUWHG
If processing of the PCB has been aborted by a click on the PCB icon (see example above),
the color of the PCB icon changes to red.
The icon is also displayed in red if a PCB is manually placed on processing conveyor 1 or 2.
The PCB is not recognized by the system and is transported to the output conveyor.
User’s Manual SIPLACE HS-50 3 Introduction and Basic Concepts
Software Version SR.501.xx Edition 01/99 3.2 Principles of the Graphic User Interface
105
0HDQLQJRI2WKHU,FRQVDQG0DUNLQJV
If a track error, machine error or conveyor error occurs, then the corresponding graphic is
highlighted in red (see examples below).
Examples: If an error occurs in a processing area, then this is displayed with a red
border.
You can abort processing of the PCB which is located in this area by clicking the
PCB icon.
If a conveyor error occurs during transport, this is indicated by the presence of red
bars on the left and right.
If a track error occurs (e.g. missing components), then individual parts of the
graphic which correspond to the layout of the current feeder location are
displayed
against a red background. In addition, the graphic is displayed with a contour.
If you click this graphic, you can use the corresponding function to "refill" the
location (see Chapter 4).
0DFKLQHHUURU
&RPSRQHQWVPLVVLQJDWIHHGHUORFDWLRQ
)HHGHUORFDWLRQIXOO
&RQYH\RUVHWWR7UDQVSRUWWKURXJK
NOTE
This means that the "Process PCB" function is deactivated in the machine options.
The PCBs are passed through the entire transport process without being processed.