00191369-01 - 第112页
3 Introduction and Basic Concepts User’ s M anual SIPLACE HS -50 3.3 User Interface - Views and Menus Software Version SR.501.xx Edition 01/99 110 9 LHZ0HQX The "View" men u contains th e optio ns fo…
User’s Manual SIPLACE HS-50 3 Introduction and Basic Concepts
Software Version SR.501.xx Edition 01/99 3.3 User Interface - Views and Menus
109
6ZLWFKWR0,6
This menu function cannot be executed in the current software version.
6ZLWFKWR6,3/$&(3UR
This menu function cannot be executed in the current software version.
6ZLWFKWRRSHUDWLQJV\VWHP
You use this menu item to switch to the Windows operating system after entering your
password. From here, you can then subsequently return to the SIPLACE user interface.
NOTE
This menu option is not available at the "Operator" access level.
Å Click the menu item 6ZLWFKWRRSHUDWLQJV\VWHP
The Windows user interface is displayed and the SC software continues to run in the
background.
6KXWGRZQFRPSXWHU
All applications are closed without any files which may have been processed being saved and
the station computer is shut down.
NOTE
This menu option is not available at the "Operator" access level.
Å Click the menu item 6KXWGRZQFRPSXWHU
The following dialog box is opened.
Å Click <HV if you want to terminate your work.
The station computer is shut down.
Å Switch off the machine at the main switch.
3 Introduction and Basic Concepts User’s Manual SIPLACE HS-50
3.3 User Interface - Views and Menus Software Version SR.501.xx Edition 01/99
110
9LHZ0HQX
The "View" menu contains the options for calling the placement functions, single functions and
vision functions. It is also used to start the SITEST test program and call the view for running
the GEM functions.
Å Click the required menu option.
The screen display is switched to the corresponding view in which you can then call the
necessary functions.
NOTE
All the options in this menu can also be called by clicking the corresponding toolbar button
(see section 3.2.2.2) or by pressing the corresponding function key. If shortcuts have been
defined, these can also be used.
NOTE
The 3 menu options below belong to the group of placement functions.
6HWXS )
The setup for a feeder location is displayed in tabular form. It can be called separately for each
of the four locations.
The procedure is described in more detail in Chapter 4 "Placement Functions".
(UURUV )
Errors are differentiated by type and each error type is presented in a separate table. You can
call separate tables for track errors, conveyor errors, machine errors and general errors.
The last error to have occurred is always displayed at the top of the table. Identical errors are
cumulated in the error counter ("#E" column).
The procedure is described in more detail in Chapter 4 "Placement Functions".
)HHGHUV )
Here you can use a variety of functions to display and fill empty tracks for linear feeders or to
display and modify inventory levels for trays and wafflepack changers.
The procedure is described in more detail in Chapter 4 "Placement Functions".
User’s Manual SIPLACE HS-50 3 Introduction and Basic Concepts
Software Version SR.501.xx Edition 01/99 3.3 User Interface - Views and Menus
111
NOTE
The following 6 menu options belong to the group of single functions.
The single functions are used to execute specific actions following fatal errors as well as to set
up and test the machine since they allow you to address the various functional modules in a
defined manner.
Execution of the single functions is described in Chapter 5 "Single Functions".
*DQWU\ )
This allows you to call the single functions for gantry 1. These functions can be used, for
example, to test the revolver head functions.
NOTE
Each of the 4 gantries can be addressed separately.
The functions are identical for all the gantries.
*DQWU\ )
Single functions for gantry 2
*DQWU\ 6KLIW
Single functions for gantry 3
*DQWU\ 6KLIW
Single functions for gantry 4
7UDQVSRUW)
Single functions for PCB conveyor 2 (= left conveyor track in the case of twin conveyors)
NOTE
The single functions for Conveyor 2 cannot be called unless twin conveyors are configured.
The functions are identical to the functions for Conveyor 1.
7UDQVSRUW)
Used to call the single functions for PCB conveyor 1 (= right conveyor track in the case of twin
conveyors). These are used to test and set the functional modules for PCB conveyor as well
as to set the conveyor width.