00191369-01 - 第172页
5 Single Functions User’s Manual SIPLACE HS-50 5.3 Single functions, T ransport Software Version SR.501.xx Edition 01/99 170 6LQJOHIXQFWLRQV7 UDQVSRUW NOTE The travel function s of th e x or y ax is can only be c …
User’s Manual SIPLACE HS-50 5 Single Functions
Software Version SR.501.xx Edition 01/99 5.2 Single functions, Gantry
169
&RQILUPPDJD]
This function is used to confirm that an individual magazine has been filled with a new nozzle
type.
When changing the set-up of a machine it may be necessary to change the type of nozzle in
some of the magazines. To do this, the current nozzle configuration (Actual) and the nozzle
configuration for the new set-up (Preset) is shown in the table for each of magazine. When
you change the nozzle type from the "Actual" to "Preset" type, you must confirm this for each
magazine separately.
Å Click the entry in the table which corresponds to the magazine for which you must change
the nozzle type. The line is now highlighted in light blue.
Å Click the /RFNRSFORVHbutton.
Å Replace all the nozzles in this magazine with the nozzle type shown in the "Preset" column.
Å Click the /RFNRSFORVHbutton again.
Å Click the &RQILUPPDJD] button.
The change of is now confirmed. In the table, the arrow ( <== ) is no longer displayed next
to the entry for this magazine.
5 Single Functions User’s Manual SIPLACE HS-50
5.3 Single functions, Transport Software Version SR.501.xx Edition 01/99
170
6LQJOHIXQFWLRQV7UDQVSRUW
NOTE
The travel functions of the x or y axis can only be carried out when the machine cover is
closed. To execute this function, press the start button.
As a rule, the gantries only travel slowly. The revolver head is set to travel slowly.
Å On the tool bar in the main view, click the symbol which represents the transport you want
to test the functions of (or select the corresponding menu item from the "View" menu, e.g.
"Transport 1" for Transport 1).
NOTE
When dual transport is installed and available in the machine options, the single functions
can be called for either the right-hand transport (Transport 1) or the left-hand transport
(Transport 2). The functions are identical for both right and left. The symbols used to call
the single functions are marked with the number which corresponds to the transport side.
Example for Transport 1 (= right-hand transport or single transport).
The user interface is switched to the "Transport functions" screen of the selected transport
(see Fig. 5.3 - 1
).
User’s Manual SIPLACE HS-50 5 Single Functions
Software Version SR.501.xx Edition 01/99 5.3 Single functions, Transport
171
7UDQVSRUWIXQFWLRQVVFUHHQ
The transport functions are used for checking and adjusting the functional modules of the
board conveying systems.
.H\WR)LJ
(1) Functions for the board conveying systems
(2) Functions for adjusting the transport conveyor width
(3) Functions to display state of the ultrasonic sensors
12
3