00191369-01 - 第21页
User Manual HS-50 1 Introduction Software Version 5.01 01/99 Issue 1.3 User classification 19 &RPSRQHQW KDQGOLQJ In this c hapter y ou will fi nd infor mation concerni ng the fe eder mod ules and the com ponents t…
1 Introduction User Manual HS-50
1.2 Structure of the User Manual Software Version 5.01 01/99 Issue
18
2SHUDWLRQDOVDIHW\
This chapter covers all safety-related matters. It includes, for example, conventions for the use
of safety instructions in this manual and rules to ensure safe operation of the placement sys-
tem. The safety equipment and safety circuits are described in detail. The chapter also con-
tains important information on the placement system’s energy state, which is needed for
servicing and maintenance work.
,QWURGXFWRU\QRWHVDQGEDVLFWHUPV
The automatic placement system’s controls and user interface are described in this chapter.
Illustrations and flow charts are used to explain the structure of the user interface.
3ODFHPHQWIXQFWLRQV
This chapter provides information on setting up the placement system. One section classifies
the various errors that can occur and describes the individual menus. In the "feeder modules"
section you will learn how to prepare the components and set up and check feeder modules.
6LQJOHIXQFWLRQV
This chapter explains the individual gantry, placement head and PCB conveyor functions. Af-
ter reading this chapter, you will be able to test the operating statuses of these modules and
analyze errors that occur.
9LVLRQIXQFWLRQV
The functions and technical data of the PCB and component vision systems are described in
this chapter, which also contains a comprehensive description of the menus for optical PCB
and component centering and the vision parameters.
:KDWWRGRZKHQ
Pass this chapter on to your machine operators. It contains valuable tips and tricks gained
from experience. For example, you will learn how to minimize downtimes by taking preventive
action.
(UURULQIRDQGGLDJQRVWLFV
This chapter contains basic instructions on how to use the information provided by the error
diagnosis system, which also enables you to enter and save your own notes on errors that
have occurred. The menu-driven diagnosis system is a valuable aid to trouble-shooting and
error analysis.
2QOLQHKHOS
This chapter explains how to use the on-line help system.
User Manual HS-50 1 Introduction
Software Version 5.01 01/99 Issue 1.3 User classification
19
&RPSRQHQWKDQGOLQJ
In this chapter you will find information concerning the feeder modules and the components
they can be used to insert.
6WDWLRQH[WHQVLRQVRSWLRQV
Overviews of the nozzle changers, PCB barcode readers, Remote Service, etc.
6RIWZDUHLQVWDOODWLRQ
This chapter tells you how to install the software.
1R]]OHRYHUYLHZ
This chapter is made up of the nozzle contour diagrams and nozzle overviews. The nozzle
contour diagrams are used to determine the placement shadow for the individual nozzles.
8VHUFODVV LILFDWLRQ
The operating software is structured so that certain functions or menus can only by used or
called by appropriately trained personnel. There are three different classes of user:
– operators,
– line engineers and
– service engineers.
Access to each class may be password-protected. Chapters containing information for user
classes higher than "operator" contain a reference to the user class concerned in the footer.
2SHUDWRUV
The operator class consists of any person who has been trained in operation of the machine.
These people are authorized to use any functions associated with operating the machine and
may call up any menus needed to use the machine.
/LQHHQJLQHHUV
Line engineers have undergone special training and are authorized to carry out line engineer
activities, such as creating set-up configurations, determining vision parameters, etc.
1 Introduction User Manual HS-50
1.4 Revision index Software Version 5.01 01/99 Issue
20
6HUYLFHHQJLQHHUV
This class is reserved for Siemens engineers, who are trained to carry out servicing work and
to upgrade and retrofit the placement system.
WARNING A thorough knowledge of the relevant part of this User Manual is
required before carrying out any work on the machine. All work must be carried out by appro-
priately trained and qualified personnel. All warning, caution and danger notes MUST be ob-
served.
PLEASE NOTE: The content of this User Manual is not part of or intended to modify a previous
or existing agreement, undertaking or legal relationship. Any undertakings entered into by Si-
emens AG result from the purchase contract, which also contains complete and generally ap-
plicable guarantees. Such contractual guarantee provisions are neither extended nor
restricted by the information given in this User Manual.
5HYLVLRQLQGH[
0DQXDO 6RIWZDUHYHUVLRQ ,VVXH
First draft HS-50 Provisional User Manual 5.01 09/98
Revision of HS-50 User Manual 5.01 01/99