00191369-01 - 第371页
User Manual HS-50 10 Component han dling Software-Version 5.0101/99 Issue 10.4 Tape container 369 the feeder modules operate reliabl y . (1) Compone nt table (2 ) Spi ndle pos ition for 15" ree ls (3) W aste tape…
10 Component handling User Manual HS-50
10.4 Tape container Software-Version 5.01 01/99 Issue
368
.H\ WR )LJ
(1) Feeder module, 30 mm wide
(2) Feeder module, 45 mm wide
(3) Feeder module, 30 mm wide
7DSHFRQWDLQHU
2Y HUYLHZ
Reels up to 15" in diameter may be used, although for 15" reels you should use spindles as well.
Insert the spindles into the partitions as shown in Fig. 10.4 - 1.
PLEASE NOTE
We recommend that you use spindles if the tape reel diameter exceeds 5". This will ensure that
User Manual HS-50 10 Component handling
Software-Version 5.0101/99 Issue 10.4 Tape container
369
the feeder modules operate reliably.
(1) Component table (2) Spindle position for 15" reels
(3) Waste tape container (4) Partition
(5) Tape container (6) Spindles
6
5
4
3
2
1
10 Component handling User Manual HS-50
10.5 Used tape cutter Software-Version 5.01 01/99 Issue
370
8VHGWDSHFXWWHU
.H\ WR )LJ
(1) Used tape cutter
(2) Used tape guide channel
1
1
1
1
2
2
2
1
2