00191369-01 - 第392页
11 Station extensions / options User Manual HS -50 11.3 Dual conveyor Software Version 5.01 01/99 Issue 390 *HQHUDO As the n ame suggests, the dual convey or has two tran sport tr acks, wh ich are elec trical ly…
User Manual HS-50 11 Station extensions / options
Software Version 5.0101/99 Issue 11.3 Dual conveyor
389
'XDOFRQYH\RU
6WUXFWXUHRIWKHGXDOFRQYH\RU
The conveyor belts are driven by DC motors. There is a lifting table for holding the PCBs in each
processing area. The width of the PCB conveyor can be adjusted either via the menu or using the
line computer.
(1) Feeding area (2) Processing area 1
(3) Intermediate area (4) Processing area 2
(5) Output area (6) Lifting table, processing area 1
(7) Lifting table, processing area 2 T1 Transport track 1
T2 Transport track 2
6
7
5
4
3
2
1
T2
T1
11 Station extensions / options User Manual HS-50
11.3 Dual conveyor Software Version 5.01 01/99 Issue
390
*HQHUDO
As the name suggests, the dual conveyor has two transport tracks, which are electrically and me-
chanically independent of one another. In the Standard version, the right-hand side is the fixed
side. There is another version, however, in which the left-hand side is the fixed side.
There are two conveyor modes: "Dual conveyor synchronous" and "Dual conveyor asynchronous.
Enter the conveyor mode you wish to use in the machine data (real.ma).
'HILQLQJWKHWUDQVSRUWWUDFNV
The right transport track (viewed in the transport direction) is designated "Transport 1" and the left
as "Transport 2" (see Fig. 11.3 - 1).
&KDQJLQJWKHFRQYH\R UPRGH
$V\QFKURQRXVFRQYH\RUPRGH
'HVFULSWLRQ
In asynchronous mode, only one PCB in a transport track is processed. At the same time, another
PCB in the second transport track is moved into the placement position. This saves the full con-
veying time of one PCB, thus considerably increasing performance, particularly for PCBs with a
short cycle time.
)XQFWLRQ
Once the machine has received the job data (cluster, set-up), the PCBs on the feeding belts are
continuously transported to the available processing belt (provided that the belt is free) throughout
the placement operation. The placement sequence starts as soon as a PCB has moved onto the
relevant processing belt. The PCBs are processed one after another.
PLEASE NOTE
The components to be placed and the width of the PCBs must be identical on transport track 1
and 2.
&RQYH\RUPRGH ,QSXWLQUHDOPD
Single conveyor 0
Dual conveyor synchronous 1
Dual conveyor asynchronous 2
User Manual HS-50 11 Station extensions / options
Software Version 5.0101/99 Issue 11.3 Dual conveyor
391
If the placement sequence is interrupted, the conveyor interface will be disabled and the PCBs
currently on the processing belts will be completed.
The conveyor interface is disabled or enabled simultaneously for both transport tracks.
6\QFKURQRXVFRQY H\RUPRGH
'HVFULSWLRQ
In synchronous mode, two PCBs of the same size are moved into the placement position at the
same time. They must be processed as a single cluster.
This enables the top and bottom of a PCB to be processed on a single line. This reduces the time
needed to transport the PCBs, since two PCBs are always transported at the same time.
)XQFWLRQ
PCBs on transport tracks 1 and 2 are moved synchronously (i.e. the conveyor belts are indepen-
dent of one another, but are controlled synchronously) on the conveyor sections. The components
to be placed for transport track 1 and 2 must be organised as a cluster in two circuit images (see
the line computer operating instructions).
If only one transport track (or processing belt) is occupied at the start of the placement sequence,
the circuit image for this conveyor section is identified as "do not place".
&RQWUROOLQJWKHGXDOFRQYH\RUZLWKWKH6LQJOHIXQFWLRQVPHQX
Control of the dual conveyor and the Single functions menu are described in section 5 of these
operating instructions.
$XWRPDWLFZLGWKDGMXVW PHQWRQWKHGXDOFRQYH\RU
PLEASE NOTE
The conveyor setpoint width relates to both conveyor belts. When the command is received, the
conveyor belts are set to the setpoint width one after another.
$XWRPDWLFZLGWKDGMXVWPHQWLVGHDFWLYDWHGZKHQV\QFKURQRXVFRQY H\RULVVHOHFWHG.