00191369-01 - 第56页
2 Operational Safety User Manual HS-50 2.1 Safety instructions Software-Version 5.01 Edition 01/99 54 Item 9 from the diagr am showi ng the w arning s igns on the pla cement sy stem - on t he UPS and station comp uter …
User Manual HS-50 2 Operational Safety
Software-Version 5.01Edition 01/99 2.1 Safety instructions
53
Item 6 from the diagram showing the warning signs on the basic machine on the service socket
(behind the safety doors in the power supply unit)
Item 7 from the diagram showing the warning signs on the basic machine - permanent magnets
for the y axes
Item 8 from the diagram showing the warning signs on the placement system - on the servo unit
Warning!
When the main switch is switched off
under voltage
7
$WWHQWLRQ
Wait at least 20 seconds before
removing the modules to allow
the capacitors to discharge fully
8
2 Operational Safety User Manual HS-50
2.1 Safety instructions Software-Version 5.01 Edition 01/99
54
Item 9 from the diagram showing the warning signs on the placement system - on the UPS and
station computer (beneath the PCB conveyor)
6DIHW\LQVWUXFWLRQVIRUFORVLQJWKHSURWHFWLYHFRYHUV
To prevent all risk of injury when closing the protective covers on the machine, all personnel must
be required to follow the instructions below when closing the covers.
RISK OF CRUSHING HANDS IF THE PROTECTIVE COVERS ARE NOT CLOSED
CORRECTLY
Warning!
When the main switch is switched off
under voltage
User Manual HS-50 2 Operational Safety
Software-Version 5.01Edition 01/99 2.1 Safety instructions
55
1. Protective covers
2. Recessed grips
Å When opening or closing the protective covers, always hold the covers by the recessed grips.
If the shock absorbing capacity of the protective covers reduces over time, for example, your
hands can easily be crushed if you do not close the covers using the recessed grips.