00191369-01 - 第61页
User Manual HS-50 2 Operational Safety Software-Version 5.01Edition 01/99 2.2 Safety equipment 59 )XQF WLRQ If one of the p rotecti ve co vers is fo lded up or one of th e cover s on the P CB convey or is rai sed, the po…
2 Operational Safety User Manual HS-50
2.2 Safety equipment Software-Version 5.01 Edition 01/99
58
6DIHW\HTXLSPHQW
3URWHFWLYHFRYHUV
The travelling range of the gantries is covered by four protective covers which can be folded up.
Side screens prevent access to the inside of the placement system from the side. The covers over
the input and output belts of the PCB conveyor and the guards on the input and output belts pre-
vent access to the PCB conveyor.
1. Protective covers 2. Safety screens
3. Cover and guard on the input belt 4. Cover and guard on the output belt
User Manual HS-50 2 Operational Safety
Software-Version 5.01Edition 01/99 2.2 Safety equipment
59
)XQF WLRQ
If one of the protective covers is folded up or one of the covers on the PCB conveyor is raised, the
power supply to the gantry axes will be interrupted immediately. The gantry axes will stop and the
message "Close the cover" will appear on screen.
Å Close the protective covers and press one of the Start buttons to continue placement.
1. Start buttons (white) on the placement system
A
A
1
1
1
1
2 Operational Safety User Manual HS-50
2.2 Safety equipment Software-Version 5.01 Edition 01/99
60
*XDUGRQWKHLQSXW RXWSXWEHOW
DANGER The guard must always be set to the height of the PCB to be pro-
cessed. Ensure that the gap between the guard and the safety bar is as small as possible.
Guards are fitted on the input and output belts of the PCB conveyor.
Å Set the height of the guard using the slots so that the PCB can pass through.
1. Safety bar (fixed)
2. Guard (adjustable)
3. Slots for adjusting the height
4. Cover
4
3
1
2