00191369-01 - 第87页

User’s Manual SIPLACE HS-50 3 Introduction and Basic Concepts Software Vers ion SR.501.xx E dition 01/99 85  ,QWURGXFWLRQDQG%DVLF&RQFHSW V This cha pter desc ribes the machine display s and co ntrols t ogether wi…

2 Operational Safety User Manual HS-50

2.7 ESD guidelines Software-Version 5.01 Edition 01/99

a switch cabinet, a water pipe, etc.). 

Do not allow modules with chargeable and highly insulating materials to touch one another, e.g.

plastic films, insulating table surfaces or items of clothing made from synthetic fibers. 

Always place the modules on a conductive surface (table with an ESD coating, conductive ESD

foam, ESD bag or container). 

Do not bring modules near visual display units, monitors or televisions. Keep them at least 10 cm

away from the screen. 

 0HDVXUHPHQWVDQGPRGLILFDWLRQVWR(6'PRGXOHV

Do not take measurements on such modules unless

Å the measuring device is earthed (e.g. via PE conductors) or

Å you discharge the measuring head just before taking measurements with a potential-free mea-

suring device (e.g. by touching an unpainted metal part of the controller casing).

Å Always use an earthed soldering iron if you carry out any soldering work.

 'LVSD WFKLQJ(6'PRGXOHV

Å Always store modules and components in conductive packaging (e.g. metallized plastic bags

or metal sleeves) and dispatch them in conductive packaging.

If the packaging is not conductive, place the modules in a conductive envelope before pack-

aging. (Use ESD bags, domestic aluminum foil or paper, for example. NEVER use plastic bags

or film). 

Å If the module has integral batteries, ensure that the conductive packaging does not touch or

short-circuit the battery terminals and, if necessary, first cover the terminals with insulating tape

or material.



User’s Manual SIPLACE HS-50 3 Introduction and Basic Concepts

Software Version SR.501.xx Edition 01/99

 ,QWURGXFWLRQDQG%DVLF&RQFHSWV

This chapter describes the machine displays and controls together with the components of the

graphic user interface.



It also provides a basic understanding of the use of the user interface and its functions. 

NOTE

It is essential for operators who are not yet familiar with the user interface of the station

computer software (SC software) to read this chapter. 

3 Introduction and Basic Concepts User’s Manual SIPLACE HS-50

3.1 Machine Displays and Controls Software Version SR.501.xx Edition 01/99

 0DFKLQH'LVSOD\VDQG&RQWUROV

 2YHUYLHZ

.H\WR)LJ

(1) Monitor (left side)

(2) Keyboard (left side)

(3) Gantry 4

(4) Gantry 1

(5) Keyboard (right side)

(6) Monitor (right side)

(7) Gantry 2

(8) Gantry 3