00197787-02_SI_SIPLACE_HeadVerification_EN - 第3页
3 Software Manual SIPLACE Head Verification 03/2018 Table of Contents Table of Contents 1 Introduction .. 7 2 Safety .. 9 3 Head verification principles .. 11 3.1 Starting the offline head verification .. 11 3.1.…
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining
trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate
the rights of the owner.
We have reviewed the contents of this publication to ensure consistency with the hardware and software de-
scribed. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the informa-
tion in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Strasse 44
81379 Munich
Germany
Item no.: 00197787-02
www.asm-smt.com Printed by ASM Assembly Systems
3Software Manual SIPLACE Head Verification 03/2018
Table of Contents
Table of Contents
1 Introduction.. 7
2 Safety.. 9
3 Head verification principles.. 11
3.1 Starting the offline head verification.. 11
3.1.1 First start of software.. 12
3.1.2 Head not recognized.. 13
3.1.3 Helpful HCS functions.. 14
3.1.3.1 Adding users.. 14
3.1.3.2 Modifying the test bench configuration.. 14
3.1.3.3 Checking / modifying the zero point correction.. 15
3.2 Starting the online head verification.. 17
3.3 Head verification software.. 18
3.3.1 Meta data.. 18
3.3.2 Selection of measurements.. 18
3.3.3 Starting the head verification.. 19
3.3.4 Measurement progress.. 20
3.3.5 Test details.. 21
3.3.6 End of measurement – Summary.. 22
4 Offline head verification.. 23
4.1 Preliminary steps.. 23
4.2 Available measurements for C&P20A.. 24
4.3 Available measurements for C&P20P.. 25
4.4 Available measurements for CPP.. 26
4.5 Available measurements for TH.. 27
5 Online head verification workflow.. 29
5.1 Preliminary steps.. 29
5.2 Available measurements for C&P20A.. 30
5.3 Available measurements for C&P20P.. 31
5.4 Available measurements for CPP.. 32
5.5 Available measurements for TH.. 33
6 Description of the test results.. 35
6.1 Air & vacuum checks.. 35
6.1.1 Measurement principle.. 35
6.1.2 Measurement result.. 35
6.1.3 Interpretation of the results obtained.. 36
6.2 Air & vacuum with head sensor.. 37
6.2.1 Measurement principle.. 37
6.2.2 Measurement result.. 37
6.2.3 Interpretation of the results obtained.. 39
6.3 Air & vacuum with external sensor.. 40
6.3.1 Measurement principle.. 40
6.3.2 Measurement result.. 40
4 Software Manual SIPLACE Head Verification 03/2018
Table of Contents
6.3.3 Interpretation of the results obtained.. 41
6.4 Anti-glare shield mounting.. 42
6.4.1 Measurement principle.. 42
6.4.2 Measurement result.. 42
6.4.3 Interpretation of the results obtained.. 43
6.5 CS Sensor voltage and z-heights.. 44
6.5.1 Measurement principle.. 44
6.5.2 Measurement result.. 44
6.5.3 Interpretation of the results obtained.. 45
6.6 Component sensor calibration.. 46
6.6.1 Measurement principle.. 46
6.6.2 Measurement result.. 46
6.6.3 Interpretation of the results obtained.. 46
6.7 DP positioning time.. 47
6.7.1 Measurement principle.. 47
6.7.2 Measurement result.. 47
6.7.3 Interpretation of the results obtained.. 47
6.8 DP rotation test.. 48
6.8.1 Measurement principle.. 48
6.8.2 Measurement result.. 48
6.8.3 Interpretation of the results obtained.. 49
6.9 Dp- / Z-Positioning.. 50
6.9.1 Measurement principle.. 50
6.9.2 Measurement result.. 50
6.9.3 Interpretation of the results obtained.. 51
6.10 Filter Disc.. 52
6.10.1 Measurement principle.. 52
6.10.2 Measurement result.. 52
6.10.3 Interpretation of the results obtained.. 53
6.11 Force measurement for C&P heads.. 54
6.11.1 Measurement principle.. 54
6.11.2 Measurement result.. 54
6.11.3 Interpretation of the results obtained.. 55
6.12 Force measurement P&P module (TH).. 56
6.12.1 Measurement principle.. 56
6.12.2 Measurement result.. 56
6.12.3 Interpretation of the results obtained.. 57
6.13 Force sensor calibration / Force sensor calibration (final).. 58
6.13.1 Measurement principle.. 58
6.13.2 Measurement result.. 58
6.13.3 Interpretation of the results obtained.. 59
6.14 Head endurance run 01005.. 60
6.14.1 Measurement principle.. 60
6.14.2 Measurement result.. 60
6.14.3 Interpretation of the results obtained.. 62
6.15 Head endurance run 2N.. 63
6.15.1 Measurement principle.. 63
6.15.2 Measurement result.. 63
6.15.3 Interpretation of the results obtained.. 64
6.16 Head endurance run LS.. 65