00197457-01_IM_EDM_2.2_en - 第13页
EDM V2.2 / I nstal lation M anual 10/2013 Edit ion 13 Figure 4-6 : EDM database options If a com patible EDM datab ase has a lread y b een d etected , th is is t aken over and converted t o the current v ersion. Ot herwi…
EDM V2.2 / Installation Manual 10/2013 Edition
12
4.2 Installing EDM Master (Master Server)
Figure 4-5: Configuring the EDM database
The installation procedure is identical for both options.
► Select the server for the Clearing Pool database.
► Enter the password for the database user 'sa'.
Only SQL server instances on the local host are available for selection.
If no EDM database yet exists:
► Confirm the creation of the new database.
► Enter the database options in the following screen
The default settings are generally sufficient.
► Confirm your entries with Next.
EDM V2.2 / Installation Manual 10/2013 Edition
13
Figure 4-6: EDM database options
If a compatible EDM database has already been detected, this is taken over and converted to the
current version. Otherwise you are asked whether you want to replace the database or select a
different server.
► Confirm your selection with Next.
► Use the Basic EDM Configuration Dialog (see section 6.2.1), which is presented now, to edit
the fundamental settings.
EDM V2.2 / Installation Manual 10/2013 Edition
14
4.3 Installing EDM Line (Line Server)
Figure 4-7: Selecting the Master Server
► Edit the host name of the configuration server, keeping the port setting (9003) to the default
value.
► If you would like to check the connection during the installation, mark the Download the
configuration data immediately checkbox to attempt to obtain a valid configuration
immediately after installation (in either case, the EDM applications will contact the configuration
server on startup).
► The Enter configuration data checkbox (recommended setting is on) allows you to edit some
basic settings of the EDM Line on finishing the setup (see section 6.2.1.2).
► Confirm the selection with the Next button.
4.4 Installing Clearing Pool
CAUTION
Before installing a Clearing Pool on your local PC that has access to a remote EDM
master you have to install SIPLACE Pro Desk (in the "Client" configuration)
on your local
system. The local SIPLACE Pro Desk installation needs access to the SPI instance of
the remote EDM Master.
Push mode will not work properly if this local installation cannot access the SIPLACE
Pro Server of the configured EDM Master.
► Confirm the selection with the Next button.
The SIPLACE EDM installation checks if it can connect to the specified server and if a Clearing
Pool database is present there.