Preventive Maintenance.pdf - 第8页

PREVENTIVE MAINTENANCE DAILY MAINTENANCE 35.8 Technical Re ference Manual Chapter Issue 3 Jan 08 NOTE Any items heavily cont aminated requiring thoroug h cleaning must be re-lubri- cated in accordance with the appropriat…

100%1 / 72
PREVENTIVE MAINTENANCE
DAILY MAINTENANCE
Chapter Issue 3 Jan 08 Technical Reference Manual 35.7
DAILY MAINTENANCE
WARNING
HARMFUL SUBSTANCES. CLEANING WIPES AND CLEANING SOLUTIONS MAY
CONTAIN SUBSTANCES HAZARDOUS TO HEALTH. OBSERVE ALL
MANUFACTURERS’ HEALTH AND SAFETY GUIDELINES. ALWAYS WEAR
APPROVED PROTECTIVE CLOTHING WHEN CLEANING THE MACHINE.
WARNING
BOARD CLAMPS. EXTREME CARE MUST BE EXERCISED WHEN WORKING IN
THE TOOLING AREA OF THE MACHINE TO AVOID INJURY. THE FOILS ON THE
FRONT AND REAR BOARD CLAMPS ARE VERY SHARP.
MANDATORY
TOXIC CHEMICALS MAY BE PRESENT. SAFETY GLOVES MUST BE WORN.
MANDATORY
TOXIC CHEMICALS MAY BE PRESENT. EYE PROTECTION MUST BE WORN.
Preparation The machine must be isolated from electrical power and air pressure. Remove
the stencil if fitted.
General
No Task Tools Completed Reference Figure
1 Inspect the following linear bearings for contam-
ination:
a. Camera Carriage
b. Paste Dispenser
c. Print Carriage
d. ProFlow
e. Rising Table
f. Transport Rails
NOTE
Refer to Cleaning and Lubrication - Linear Bear-
ings and Guide Rails, earlier in the chapter.
Spatula, THK
AFB Grease
Camera System
Paste Dispenser
Print Carriage
ProFlow Mechanism
Rising Table
Rail System
2 Inspect the following ballscrews for contamina-
tion:
a. Rising Table
b. Transport Rails
NOTE
Refer to Cleaning and Lubrication - Rising Table
and Transport Rail Ballscrews, earlier in the
chapter.
Spatula, THK
AFB Grease
Rising Table
Rail System
3 Paste Dispenser:
Remove any debris and clean the drip tray.
Spatula,
IPA Impregnated
Wipes
Paste Dispenser
4 Screen Change Mechanism:
a. Auto Drip Tray
b. Auto Drip Tray Actuator Pistons
Remove any debris and clean.
Spatula,
IPA Impregnated
Wipes
Screen Change Mechanism
PREVENTIVE MAINTENANCE
DAILY MAINTENANCE
35.8 Technical Reference Manual Chapter Issue 3 Jan 08
NOTE
Any items heavily contaminated requiring thorough cleaning must be re-lubri-
cated in accordance with the appropriate monthly maintenance task.
5 Adjustable Screen Mount (ASM):
a. ASM Assembly
b. Pulley Assemblies
c. Stencil Guide Strips
Remove any debris and clean.
Spatula,
IPA Impregnated
Wipes
Adjustable Screen Mount
(ASM)
6 Camera:
a. Up and down camera lens
b. Board at stop opto
Remove any debris and clean.
Spatula,
IPA Impregnated
Wipes
Board Opto Locations
7 Underscreen Cleaner:
a. Linear Bearings
b. Magnet Assemblies
Remove any debris and clean.
Spatula,
IPA Impregnated
Wipes
Underscreen Cleaner
8 Vortex Plus Underscreen Cleaner (only):
Remove any debris and clean the filter housing.
Spatula,
IPA Impregnated
Wipes
Vortex Plus Underscreen
Cleaner
9 Board Optos:
Clean the top of the board at left and board at
right sensors.
Spatula,
IPA Impregnated
Wipes
Board Opto Locations
10 Tooling:
Remove any debris and clean.
Spatula,
IPA Impregnated
Wipes
Rising Table
11 Grid-Look Tooling Modules:
Remove any debris and clean.
Spatula,
IPA Impregnated
Wipes
Rising Table
12 Rising Table:
a. Manual tooling plate of the rising table
b. Clatter bars
c. Splash guard (Dual Lane only)
Remove any debris and clean.
Spatula,
IPA Impregnated
Wipes
Rising Table
Rail System
Dual Lane
13 Machine Covers:
Remove any debris and clean.
NOTE
Use only soap and water on the machine view-
ing panels.
Spatula,
IPA Impregnated
Wipes
Machine Covers
Estimated time required for daily tasks 15.0 mins
No Task Tools Completed Reference Figure
PREVENTIVE MAINTENANCE
DAILY MAINTENANCE
Chapter Issue 3 Jan 08 Technical Reference Manual 35.9
Summary/Remarks
Signed: Date: