00192402-01 - 第129页
GEM for SIPLACE V7.01 ©Siemens AG, all rights r eserved page 129 of 251 6WUHDP not used
GEM for SIPLACE V7.01
Page 128 of 251 ©Siemens AG, all rights reserved
6WUHDP
not used
GEM for SIPLACE V7.01
©Siemens AG, all rights reserved page 129 of 251
6WUHDP
not used
GEM for SIPLACE V7.01
Page 130 of 251 ©Siemens AG, all rights reserved
6(&66FHQDULRV
Unless otherwise noted in this section, the Communications State is "Communicating"
and the Control state is either "On-Line/Local" or "On-Line/Remote".
(TXLSPHQW&RPPXQLFDWLRQV
(TXLSPHQW(VWDEOLVKHV&RPPXQLFDWLRQV
Assumption: Equipment's Communication state is "Enabled/Not Communicating".
Step SECS Message Description
1. H <- E S1F13 W Equipment attempts to send Establish
Communications Request.
2. If the send is not successful, or if no reply is
received from the Host, wait
„ESTABLISHCOMMUNICATIONSTIMER“
seconds, then go to step 1.
3. H -> E S1F14 The Host responds with Establish
Communications Acknowledge. If COMMACK
in this message is non-zero, wait
„ESTABLISHCOMMUNICATIONSTIMER“
seconds, then go to step 1. If COMMACK is
zero, proceed to the next step.
4. Communications is successfully established.
The Equipment changes its communication
state to Communicating. Normal SECS
message processing begins.