00192402-01 - 第148页

GEM for SIPLACE V7.01 Page 148 of 251 ©Siemens AG, all rights r eserved  (TXLSPHQW7HUPLQDO&RPPXQLFDWLRQV  +RVWWR (TXLSPHQW6LQJOH /LQH Step SECS Mes sage Descri ptio n 1. The Host has data to dis play…

100%1 / 251
GEM for SIPLACE V7.01
©Siemens AG, all rights reserved page 147 of 251
 2SHUDWRU&KDQJHV3URFHVV3URJUDP/LEUDU\
Step SECS Message Description
1. The Equipment Operator creates, changes, or
deletes a Process Program in the Library.
2. H <- E S6F11 W The Equipment sets PPCHANGESTATUS to
„Create“, „Change“, or „Delete“, as appropriate,
sets PPCHANGENAME, and signals CEID
GemPPChangeEvent. Event Reports as
appropriate.
3. H -> E S6F12 The Host acknowledges the report.
GEM for SIPLACE V7.01
Page 148 of 251 ©Siemens AG, all rights reserved
 (TXLSPHQW7HUPLQDO&RPPXQLFDWLRQV
 +RVWWR(TXLSPHQW6LQJOH/LQH
Step SECS Message Description
1. The Host has data to display at the Equipment’s
front panel.
2. H -> E S10F3 [W] Terminal Display. The Host sends text. The
Equipment displays the text on its front panel.
3. H <- E S10F4 If the W-bit in S10F3 is 1, the Equipment
acknowledges.
4. The Operator acknowledges that he/she has
read the message.
5. H <- E S6F11 W The Equipment signals CEID S10Ack. Event
Reports as appropriate.
6. H -> E S6F12 The Host acknowledges the report.
 +RVWWR(TXLSPHQW0XOWL/LQH
Step SECS Message Description
1. The Host has a multi-line data to display at the
Equipment front panel.
2. H -> E S10F5 [W] Terminal Display Multiple. The Host sends text.
The Equipment displays the text on its front
panel.
3. H <- E S10F6 If W-bit in S10F5 is 1, the Equipment
acknowledges.
4. The Operator acknowledges that he/she has
read the message.
5. H <- E S10F11 W The Equipment signals CEID HostMsgAck.
Event Reports as appropriate.
6. H -> E S6F12 The Host acknowledges the report.
 (TXLSPHQW6HQGV7H[WWR+RVW
Step SECS Message Description
1. The Equipment operator enters data to send to
the Host.
2. H <- E S10F1 [W] Equipment sends text to Host. The W-bit in this
message may be either 0 or 1. The Host
displays the message for the operator.
3. H -> E S10F2 If the W-bit in S10F1 is 1, the Host
acknowledges the text message.
GEM for SIPLACE V7.01
©Siemens AG, all rights reserved page 149 of 251
 (UURU0HVVDJHV
 8QUHFRJQL]HG'HYLFH,'
Step SECS Message Description
1. H -> E SnFn [W] Host sends a message with a bad Device ID in
the header. The W-bit can be either 0 or 1.
2. H <- E S9F1 Equipment replies with „Unrecognized Device
ID“.
 8QUHFRJQL]HG6WUHDP
Step SECS Message Description
1. H -> E SnFn [W] Host sends a primary message with a stream
number that the Equipment does not support.
The W-bit can be either 0 or 1.
2. H <- E S9F3 Equipment replies with „Unrecognized Stream“.
 8QUHFRJQL]HG)XQFWLRQ
Step SECS Message Description
1. H -> E SnFn [W] Host sends a primary message with a stream
number for which the Equipment recognizes
some messages, but with a function number that
the Equipment does not support for that stream.
The W-bit can be either 0 or 1.
2. H <- E S9F5 Equipment replies with „Unrecognized Function“.
 ,OOHJDO'DWD)RUPDW
Step SECS Message Description
1. H -> E SnFn [W] Host sends a message with a stream and
function that the Equipment recognizes, but with
a data format that is incorrect. The W-bit can be
either 0 or 1.
2. H <- E S9F7