00192402-01 - 第158页
GEM for SIPLACE V7.01 Page 158 of 251 ©Siemens AG, all rights r eserved 9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ ,'LY LVLRQ! 8&RPS&RXQW! ! ! For a detailed desc ription of the data item see …
GEM for SIPLACE V7.01
©Siemens AG, all rights reserved page 157 of 251
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
The state of the center conveyor
0 = Empty
1 = Full
2 = Error
612003 SV U1 OUTPUTCONVEYORSTATE.
The state of output conveyor.
0 = Empty
1 = Full
2 = Error
612004 SV U1 TWININPUTCONVEYORSTATE.
The state of the input conveyor. on twin side
0 = Empty
1 = Full
2 = Error
612005 SV U1 TWINCENTERCONVEYORSTATE.
The state of the center conveyor on twin side
0 = Empty
1 = Full
2 = Error
612006 SV U1 TWINOUTPUTCONVEYORSTATE.
The state of output conveyor on twin side.
0 = Empty
1 = Full
2 = Error
612007 SV I4 TRANSPORTWIDTH
transport width [1/1000 mm]
A value of -1 indicates an error
612008 SV I4 TWINTRANSPORTWIDTH
transport width [1/1000 mm] on twin side
A value of -1 indicates an error
Waffle Pack Changer
812001 SV L INVENTARYWPC.
Only valid after the first „WPCinvetStatus“ event.
Inventory status waffle pack changer.
/
/
$&RPSRQHQW1DPH!
,/HYHO!
GEM for SIPLACE V7.01
Page 158 of 251 ©Siemens AG, all rights reserved
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
,'LYLVLRQ!
8&RPS&RXQW!
!
!
For a detailed description of the data item see „4.2
Data Item Dictionary“.
An empty list indicates an error.
Barcode
912001 SV A BCINCENTERCONVEYOR
Barcode read from PCB in center conveyor. If no
barcode reader is installed in SIPLACE this variable
will contain an empty text
An empty text indicates an error on reading the
barcode.
912002 SV A BCININPUTCONVEYOR
Barcode read from PCB in input conveyor. If no
barcode reader is installed in SIPLACE this variable
will contain an empty text
An empty text indicates also an error on reading the
barcode.
912003 DV A COMPONENTBARCODE
Component barcode is read by the GUI.
An empty text indicates an error.
912004 DV U2 WAYOFINPUTCOMPONENTBARCODE
Way of reading the component barcode:
1: with keyboard
2: with barcode reader
912005 SV U2 PCBSIDEININPUTCONVEYOR
Side of the PCB showing the barcode (only valid in
case of two barcode reader per conveyor)
1: above
2: down
3: barcode reader manufctured by LEUTZE in use RU
the barcode could not be read
912006 SV U2 PCBSIDEINCENTERCONVEYOR
Side of the PCB showing the barcode (only valid in
case of two barcode reader per conveyor)
1: above
2: down
GEM for SIPLACE V7.01
©Siemens AG, all rights reserved page 159 of 251
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
3: barcode reader manufctured by LEUTZE in use RU
the barcode could not be read
912011 SV A BCINTWINCENTERCONVEYOR
Barcode read from PCB in twin center conveyor. If no
barcode reader is installed in SIPLACE this variable
will contain an empty text.
An empty text indicates an error on reading the
barcode.
912012 SV A BCINTWININPUTCONVEYOR
Barcode read from PCB in twin input conveyor. If no
barcode reader is installed in SIPLACE this variable
will contain an empty text.
An empty text indicates also an error on reading the
barcode.
921015 SV U2 PCBSIDEINTWININPUTCONVEYOR
Side of the PCB showing the barcode (only valid in
case of two barcode reader per conveyor)
1: above
2: down
3: barcode reader manufctured by LEUTZE in use RU
the barcode could not be read
921016 SV U2 PCBSIDEINTWINCENTERCONVEYOR
Side of the PCB showing the barcode (only valid in
case of two barcode reader per conveyor)
1: above
2: down
3: barcode reader manufctured by LEUTZE in use RU
the barcode could not be read
912017 EC U1 BCREADEREXIST
Unables/Enables the event messages of the BCread
and BCTwinRead events.
0: No BCread and BCTwinRead events send
1: BCread and BCTwinRead events send (default)
GEM-Kernel
1002001 DV A GEMEVENTTEXT.
The equipment will set this string to contain a
description of the most recent event. The Host can
include this variable in any event report it defines.
Communication Model
1002002 EC U1 INITCOMMSTATE.
Initial (power-up) Communications State.