00192402-01 - 第88页
GEM for SIPLACE V7.01 Page 88 of 251 ©Siem ens AG, all rights reserved S2F37 W * H->E <L [2] <BOOLEAN CEED> * Coll. Event Enable <L> > . 6)(QDEOH'LVDEOH(YHQW5 HSRUW$ FNQRZ OHGJ…
GEM for SIPLACE V7.01
©Siemens AG, all rights reserved page 87 of 251
...
<L [2]
<U4 CEID> * Collection Event ID
<L>
>
...
6)/LQN(YHQW5HSRUW$FNQRZOHGJH
S2F36 * H<-E
<B [1] LRACK> . * LRACK - Acknowledge Code
Normally, LRACK is zero. Any non-zero LRACK indicates the Equipment has rejected the
entire S2F35 message.
LRACK Description
0x00 OK
0x02 Denied. Invalid format.
0x03 Denied. At least one CEID link already defined
0x04 Denied. At least one CEID does not exist.
0x05 Denied. At least one RPTID does not exist.
Other Equipment has rejected the S2F35 message
6)(QDEOH'LVDEOH(YHQW5HSRUW
S2F37 W * H<-E
<L [2]
<BOOLEAN CEED> * Coll. Event Enable
<L
<U4 CEID> * Collection Event ID
...
>
> .
The Host enables reporting for a list of Collection Event IDs, or disables reporting for the
list.
CEED is "True" to indicate Enabling, or "False" to indicate Disabling reporting for the
specified CEIDs.
The Host can enable or disable all CEIDs by using the following special format:
GEM for SIPLACE V7.01
Page 88 of 251 ©Siemens AG, all rights reserved
S2F37 W * H->E
<L [2]
<BOOLEAN CEED> * Coll. Event Enable
<L>
> .
6)(QDEOH'LVDEOH(YHQW5HSRUW$FNQRZOHGJH
S2F38 * H<-E
<B [1] ERACK> . * ERACK - Acknowledge Code
Normally, ERACK is zero. Any non-zero ERACK indicates the Equipment has rejected
the entire S2F37 message.
ERACK Description
0x00 OK
0x01 Denied. At least one CEID does not exist.
6)0XOWL%ORFN
S2F39 W * H->E
<L [2]
<U4 DATAID> * DATAID
<U4 DATALENGTH>
> .
The Host may send this Inquire/Grant transaction preceding any multiblock S2F33 or
S2F35. For this Equipment, this Inquire/Grant is optional. The Equipment accepts it, but
ignores it, commits no resources, and initiates no Conversation Timeout. The Equipment
accepts multiblock S2F33 or S2F35 even if not preceded by the Inquire/Grant.
6)0XOWL%ORFN*UDQW
S2F40 * H<-E
<B [1] 00> . * GRANT
The Equipment always sends GRANT value "0".
GEM for SIPLACE V7.01
©Siemens AG, all rights reserved page 89 of 251
6)5HPRWH&RPPDQGZLWK
S2F41 [W] * H->E
<L [2]
<A RCMD> * Remote command string
<L
<L [2]
<A CPNAME> * Command Parameter Name
<CPVAL> * Command Parameter Value
>
...
>
> .
The Host sends a command with parameters to the Equipment. If a command has no
parameters, S2F41 has the following format:
S2F41 [W] * H->E
<L [2]
<A RCMD> * Remote Command String
<L>
> .
The SIPLACE ignores case when performing validity checks on the RCMD and CPNAME
strings. The ASCII strings described below may be sent in any combination of upper and
lower case characters.
The Host may optionally set the W-Bit to "1" in S2F41. If so, the Equipment replies with
S2F42.
6)5HPRWH&RPPDQG$FNQRZOHGJH
S2F42 * H<-E
<L [2]
<B [1] HCACK> * Host Command Ack. Code
<L [n]
<L [2]
<A CPNAME> * name of parameter
<B [1] CPACK> * Cmd Param Ack Code
>
...
>
> .
Normal completion returns a zero (0) in HCACK. The number of erroneous parameters
"N" in S2F42 will be zero.