SIPLACE X4 S micron X4i S micron - 第14页
14 Placement heads Nozzle changer Nozzle change r for the SIPLACE SpeedSt ar Nozzle chan ger for the SIPLACE MultiSt ar 4 magazines for 20 nozzl es of type 40xx 6 magazines for 20 nozzles of type 40xx Magazine for 9 nozz…
13
Placement heads
SIPLACE MultiStar (CPP)
SIPLACE MultiStar (CPP)
With component camera
type 30
With component camera
type 45
With component camera
type 33
(stationary camera)
Component range
a
a) Please note that the placeable component range is also affected by the pad geometry, the customer-specific stan-
dards, the component packaging tolerances and the component tolerances.
01005 mm to 27 mm x
27 mm
0201 (metric) to
15 mm x 15 mm
0402 to 50 mm x 40 mm
b
b) A diagonal of 69 mm is possible during multiple measurements (e.g. 60 mm x 10 mm).
Component spec.
Max height
c
Max. height
d
Min. lead pitch
Min. lead width
Min. ball pitch
Min. ball diameter
Min. dimensions
Max. dimensions
Max. weight
c) CPP head: in low installation position (stationary component camera not possible).
d) CPP head: in high installation position
6.0 mm
8.5 mm
0.25 mm
0.10 mm
e
/ 0.2 mm
f
0.25 mm
e
/ 0.35 mm
f
0.14 mm
e
/ 0.20 mm
f
0.4 mm x 0.2 mm
27 mm x 27 mm
4 g
e) For components < 18 mm x 18 mm
f) For components ≥ 18 mm x18 mm
6. mm
8.5 mm
0.25 mm / 0.12 mm
g
0.10 mm / 0.05 mm
g
0.25 mm
h
/ 0.14 mm
g
0.14 mm
h
/ 0.07 mm
g
0.18 mm x 0.18 mm
0.11 mm x 0.11 mm
g
15 mm x 15 mm
4 g
g) Only possible for components which are within the camera focal area of ± 1.3 mm.
h) For components < 18 mm x 18 mm
11.5 mm
0.3 mm
0.15 mm
0.35 mm
0.2 mm
1.0 mm x 0.5 mm
50 mm x 40 mm
8 g
Programmable set-down
force
1.0 - 10 N 1.0 - 10 N 1.0 - 10 N
Nozzle types 20xx, 28xx 20xx, 28xx 20xx, 28xx
X/Y accuracy
i
i) The accuracy values are measured during the machine acceptance tests. They correspond to the conditions set
out in the ASM scope of service and supply.
± 41 µm/3σ
± 55 µm/4σ
± 41 µm/3σ
± 55 µm/4σ
± 34 µm/3σ
± 45 µm/4σ
Angular accuracy ± 0.4° / 3σ
j
, ± 0.5° / 3σ
k
± 0.5° / 4σ
j
, ± 0.7° / 4σ
k
j) Component dimensions between 6 mm x 6 mm and 27 mm x 27 mm.
k) Component dimensions smaller than 6 mm x 6 mm.
± 0.4° / 3σ
j
, ± 0.5° / 3σ
k
± 0.5° / 4σ
j
, ± 0.7° / 4σ
k
± 0.2° / 3σ
± 0.3° / 4σ
Illumination levels 5 5 6
Standard functions High-resolution camera, vacuum sensor, force measurement, component sensor,
integrated turning station per segment, PCB warpage check, individual image of
each component
14
Placement heads
Nozzle changer
Nozzle changer for the SIPLACE SpeedStar
Nozzle changer for the SIPLACE MultiStar
4 magazines for 20 nozzles of
type 40xx
6 magazines for 20 nozzles of
type 40xx
Magazine for 9 nozzles of
type 28xx
Magazine for 20 nozzles of type 20xx
Description
Nozzle changers increase the flexibility of the placement heads when it comes to processing
different components. The nozzle configuration can be rapidly adjusted to changing place-
ment jobs. Precisely defined positions and perfect nozzle seat in the garage ensure minimum
radial eccentricity on the placement head.
The nozzle changers feature a monitoring circuit. This checks whether the nozzle magazines
are seated correctly on the mount. In addition, the nozzle changer recognizes whether the
magazines are for 40xx, 20xx or 28xx nozzles by the code.
15
Placement heads
Nozzle changer
Technical data
Nozzle changer for the SIPLACE SpeedStar
Number of magazines
a
SIPLACE X4 S micron
SIPLACE X4i S micron
a) All magazines in the nozzle changer must be configured.
6
4
Number of nozzle garages
SIPLACE X4 S micron
SIPLACE X4i S micron
120
80
Nozzle types 40xx
Nozzle changer for the SIPLACE MultiStar
Number of magazines
a
SIPLACE X4 S micron
SIPLACE X4i S micron
6
4
Maximum number of nozzle garages
SIPLACE X4 S micron
SIPLACE X4i S micron
120
80
Standard configuration
SIPLACE X4 S micron
SIPLACE X4i S micron
80 x 20xx nozzle garages
1 magazine with 9 x 28xx nozzle garages
60 x 20xx nozzle garages
1 magazine with 9 x 28xx nozzle garages
Nozzle types
40xx, 11xx, 12xx
20xx, 28xx