SIPLACE X4 S micron X4i S micron - 第16页
16 Board conveyor Single and flexible dual conveyor Single conveyor When using a single con- veyor, boards are moved behind one another, alo ng a conveyor lane and into the placement m achine, where they are placed. This…
15
Placement heads
Nozzle changer
Technical data
Nozzle changer for the SIPLACE SpeedStar
Number of magazines
a
SIPLACE X4 S micron
SIPLACE X4i S micron
a) All magazines in the nozzle changer must be configured.
6
4
Number of nozzle garages
SIPLACE X4 S micron
SIPLACE X4i S micron
120
80
Nozzle types 40xx
Nozzle changer for the SIPLACE MultiStar
Number of magazines
a
SIPLACE X4 S micron
SIPLACE X4i S micron
6
4
Maximum number of nozzle garages
SIPLACE X4 S micron
SIPLACE X4i S micron
120
80
Standard configuration
SIPLACE X4 S micron
SIPLACE X4i S micron
80 x 20xx nozzle garages
1 magazine with 9 x 28xx nozzle garages
60 x 20xx nozzle garages
1 magazine with 9 x 28xx nozzle garages
Nozzle types
40xx, 11xx, 12xx
20xx, 28xx
16
Board conveyor
Single and flexible dual conveyor
Single conveyor
When using a single con-
veyor, boards are moved
behind one another, along a
conveyor lane and into the
placement machine, where
they are placed. This con-
veyor variant is particularly
suitable for very wide boards.
Flexible dual conveyor
To keep the range of PCBs to
be processed as wide as
possible - whilst maintaining
maximum productivity - the
flexible SIPLACE dual con-
veyor allows you to choose
between single conveyor
mode and dual conveyor
mode. In the dual conveyor,
two boards are moved into
the placement machine and
placed either at the same
time (synchronous mode) or
alternatively (asynchronous
mode). This makes it possi-
ble to process the top and
bottom sides of a board in
one line.
Single conveyor
Flexible dual conveyor
17
Board conveyor
Technical data
Single conveyor Flexible dual con-
veyor
Dual conveyor in sin-
gle conveyor mode
Board dimensions
(length x width)
X4 S micron - standard 50 mm x 50 mm to
450 mm x 560 mm
50 mm x 50 mm to
450 mm x 320 mm
50 mm x 50 mm to
450mm x 510mm
X4i S micron - standard
a
a) I-PLacement and alternating placement mode are possible with board lengths up to 380 mm. Only alternating place-
ment mode is possible for boards longer than 380 mm.
50 mm x 50 mm to
380 mm x 560 mm
50 mm x 50 mm to
450 mm x 300 mm
50 mm x 50 mm to
450mm x 510mm
50 mm x 50 mm to
450 mm x 510 mm
50 mm x 50 mm to
380 mm x 320 mm
--
Stationary conveyor side Right or left Right, left or outer
Automatic electrical width adjust-
ment
Standard
PCB thickness
Standard: 0.3 mm to 4.5 mm
PCB warpage See page 20
PCB weight
b
Standard
b) The board weight value refers to the weight of the board plus the weight of the components.
Max. 3.0 kg Max. 2.0 kg Max. 2.0 kg
Clearance on PCB underside 25 mm
PCB conveyor height
Option:
Standard:
SMEMA option:
900 mm
930 mm
950 mm
Type of interface:
Standard:
Option:
SMEMA
Siemens
Component-free PCB handling
edge
3 mm
PCB changeover time
Single conveyor
Dual conveyor
c
c) 0 seconds in asynchronous mode, otherwise 1.5 seconds.
< 1.5 seconds
0 seconds
Important notes
When setting up a machine (S; F-, HS-, HF-, X- or D-Series) next to a SIPLACE X4 S micron / X4i S micron, be aware that there
is limited room between the two machines. In these cases, use suitable conveyor extensions to create room of 0.5m for the operator
between the two machines.
To achieve top placement performance, fit the first machine in a SIPLACE X4 S / X4i S micron line with an input conveyor extension
and the last machine in the line with an output conveyor extension.