1_H24维修手册.pdf - 第167页

E d i ti o n 5 .0 H 24 H ead R ep ai r T r ai n i n g T ext f o r S er vi ce E n g i n ee r s Pr o p e r d at a m e a s u r e m e n t fo r H 2 4 h e a d u s i n g h e a d b e n c h S uppl e me nt 1 – Pro p e r Dat a M e …

CONFIDENTIAL

Downloaded at 2015/06/18 12:05:48 (JST) by 5LUF0998

Edition 5.0 H24 Head Repair Training Text for Service Engineers

Proper data measurement for H24 head using head bench

Supplement 1 –Proper Data Measurement for H24 Head

Using Head Bench

NOTE: The servo power is ON during this measurement. Please exercise special caution

during this measurement.

Operation PC IP address setting

1. Attach the head on the head bench, and then turn the power ON.

2. The head “encoder backup alarm” must be reset before starting this process. If it has

not been reset, set the head on the head bench and use “Motion Adjustment Tool” to

reset the “encoder backup alarm”. (For the detailed procedure, refer to Chapter 9.4.)

Note: The encoder backup alarm must be reset before starting the proper data

measurement.

3. Wait for 2 minutes, and then start the “Head Check Tool”. Be sure to wait at least 2

minutes.

4. Set the operation PC IP address to “169.254.0.**” (For **, enter any number except 1”.)

5. Enter “168.254.0.1” in the IP address input window, and then, click “connect”. (The head

bench address is always 169.254.0.1. This is a fixed address.)

OFF

Emergency Stop

button

Power

FK-9F50-08-0E S1-1 FUJI MACHINE MFG. CO., LTD.

CONFIDENTIAL

Downloaded at 2015/06/18 12:05:48 (JST) by 5LUF0998

Edition 5.0 H24 Head Repair Training Text for Service Engineers

Proper data measurement for H24 head using head bench

6. The “Head check tool (head adjustment jig)” window opens.

Head adjustment jig window

1. Click “calibration data measurement” to display the individual axis measurement

window.

FK-9F50-08-0E S1-2 FUJI MACHINE MFG. CO., LTD.

CONFIDENTIAL

Downloaded at 2015/06/18 12:05:48 (JST) by 5LUF0998