1_H24维修手册.pdf - 第199页

E d i ti o n 5 .0 H 24 H ead R ep ai r T r ai n i n g T ext f o r S er vi ce E n g i n e e r s I PS C a m e r a p o s i ti o n a d j u s tm e n t fo r H 2 4 h e a d u s i n g h e a d b e n c h 4. U s e h ead be nc h R - …

Edition 5.0 H24 Head Repair Training Text for Service Engineers

IPS Camera position adjustment for H24 head using head bench

2.5 Adjusting the Camera Installation Position

1. Move the R axis so that the A-holder faces the front side of the head. (Move manually

or enter the value in Move (absolute pos.), and then click >>.

2. Press and hold the lower button for a few seconds to shift to “ADJ MODE”.

3. Press the lower button to shift to “ADJUSTMENT 1”.

FK-9F50-08-0E S2-6 FUJI MACHINE MFG. CO., LTD.

CONFIDENTIAL

Downloaded at 2015/06/18 12:05:48 (JST) by 5LUF0998

Edition 5.0 H24 Head Repair Training Text for Service Engineers

IPS Camera position adjustment for H24 head using head bench

4. Use head bench R-axis servo counter to check the A holder is at the front of the head

(the position where the B and X holders are aligned).With holder A at this position,

adjust the position of the camera so that the jigs on the B and X holders match up with

the green frames on the screen.

5. Use the bolts below to adjust the camera position so that the center value, resolution

and tilt are all within tolerance.

The jigs match the

green frames on the

screen.

FK-9F50-08-0E S2-7 FUJI MACHINE MFG. CO., LTD.

CONFIDENTIAL

Downloaded at 2015/06/18 12:05:48 (JST) by 5LUF0998

Edition 5.0 H24 Head Repair Training Text for Service Engineers

IPS Camera position adjustment for H24 head using head bench

Inspection item

Tolerance

Target value

Camera resolution

L: X = 92~108

L: Z = 92~108

Same as tolerance

Center value

R: Xs = 380~400, Zp = 235~255

L: Xp = 80~100, Zp = 237~253

R: Xs = 390, Zp = 245

L: Xp = 90, Zp = 245

Tilt

R: dX = 0~6, dZ = 0~9

L: dX = 0~6, dZ = 0~9

R: dX = 0, dZ = 0

L: dX = 0, dZ = 0

1. If the results are within tolerance, press the lower button to save the settings.

2. Once saving the settings, remove the jig nozzles (2AGKNJ001500).

Resolution

Center value

Tilt

FK-9F50-08-0E S2-8 FUJI MACHINE MFG. CO., LTD.

CONFIDENTIAL

Downloaded at 2015/06/18 12:05:48 (JST) by 5LUF0998