1_H24维修手册.pdf - 第88页

E d i ti o n 5 .0 H 24 H ead R ep ai r T r ai n i n g T e xt f o r S er v i ce E n g i n eer s R e p l a c i n g a n d A d j u s ti n g th e S te p p i n g M o to r 7 . 4 A t t a ch i n g t h e S t e ppi ng M ot or 1. A …

Edition 5.0 H24 Head Repair Training Text for Service Engineers

Replacing and Adjusting the Stepping Motor

7. Click [Move to Origin] to move the stepping motor to its origin. Check the lever is in the

center of the origin position sensor and the sensor LED is OFF. If the sensor LED is ON,

loosen the following 2 screws, and then adjust the position of the sensor.

8. Move the stepping motor lever one step to the left and one step to the right and confirm

that the LED turns ON at these positions.

9. Turn the head I/O check jig OFF.

Two screws

FK-9F50-08-0E 7-5 FUJI MACHINE MFG. CO., LTD.

CONFIDENTIAL

Downloaded at 2015/06/18 12:05:48 (JST) by 5LUF0998

Edition 5.0 H24 Head Repair Training Text for Service Engineers

Replacing and Adjusting the Stepping Motor

7.4 Attaching the Stepping Motor

1. Attach the stepping motor, tighten the 3 mounting bolts, and then connect the connector.

2. Attach the bracket with the screws, and then connect the 2 flat cables.

FK-9F50-08-0E 7-6 FUJI MACHINE MFG. CO., LTD.

CONFIDENTIAL

Downloaded at 2015/06/18 12:05:48 (JST) by 5LUF0998

Edition 5.0 H24 Head Repair Training Text for Service Engineers

Replacing and Adjusting the Stepping Motor

7.5 Adjusting the Stepping Motor Position

1. Lower the holder A spool valve by hand.

2. Move holder A to the Z-axis motor roller position by hand.

Motor roller

Spool valve for

syringe A

Syringe A

FK-9F50-08-0E 7-7 FUJI MACHINE MFG. CO., LTD.

CONFIDENTIAL

Downloaded at 2015/06/18 12:05:48 (JST) by 5LUF0998