4M184002w_F8S - 第116页

4OM-1840 1-4-41 1604-001 4.8.5 Y -axis Cable Side Cleaning and Oiling Cycle : Every 6 Months (Required Time : 3 minutes) Grease : BARRIERTA IEL/V Y-Axis Cable Side Fig. 4A4-52 Procedure    …

4OM-1840

1-4-401604-001

4.8.4 Y-axis Linear Guide Cleaning and Oiling

Cycle : Every 3 Months (Required Time : 5 minutes)

Grease : DAPHNE GREASE MP No.1

Y-Axis Linear Guides

Slider

Fig. 4A4-51

Procedure

(1) Wipe old grease out using a rag.

(2) Apply new grease from the grease nipple using the hand grease gun.

Note

Grease should be applied every 3 months after the initial month.

Notice

Take ample care not to leave any waste threads after cleaning.

4.8 X/Y Beam Section

4OM-1840

1-4-411604-001

4.8.5 Y-axis Cable Side Cleaning and Oiling

Cycle : Every 6 Months (Required Time : 3 minutes)

Grease : BARRIERTA IEL/V

Y-Axis Cable Side

Fig. 4A4-52

Procedure

  

(2) Apply new grease by hand or with a brush.

Notice

Take ample care not to leave any waste threads after cleaning.

4.8 X/Y Beam Section

4OM-1840

1-4-421604-001

4.8.6 Y-axis Cable Fixing Location Check

Cycle : Every 6 Months (Required Time : 1 minute)

Y-Axis Cable Fixing Location

Fig. 4A4-53

Procedure

Check visually for any abnormality such as cracks.

4.8.7 Y-axis Linear Encoder Scale-Tape Cleaning

Cycle : Every 6 Months (Required Time : 5 minutes)

Linear Encoder Scale-Tape

Fig. 4A4-54

Procedure

When it is very dirty, clean it using a cloth soaked in alcohol.

4.8 X/Y Beam Section