4M184002w_F8S - 第136页

4OM-1840 1-5-1 1604-001 5. Maintenance Method 5. Maintenance Method Periodically clean the vacuum nozzles to maintain reliable and stable component picks and placement. • It is advisable that the nozzles be cleaned at l…

4OM-1840

1-4-601604-001

4.13.2 Ventilating Fan (Filter) Cleaning

Fig. 4A4-73

Procedure

  

locations).

(2) Suck dirk and dust with a vacuum cleaner.

(3) Attach the exhaust fan.

4.13 Fans Section

4OM-1840

1-5-1

1604-001

5. Maintenance Method

Periodically clean the vacuum nozzles to maintain reliable and stable component

picks and placement.

•

It is advisable that the nozzles be cleaned at least once a week.

Note

The nozzle for 0402 recommends the cleaning every 3 or 4 days.

•

Change cleaning frequency according to various frequency of use and

accumulation of debris along with certain environmental conditions.

•

When the vacuum suction force weakens or a nozzle constantly fails to pick or

place components, it is required to check the nozzle for debris and cleanliness.

Do not grasp this part strongly during the

nozzle cleaning.

Otherwise, the nozzle may be damaged.

When it is necessary to hold the nozzle firmly

try to grasp the collar portion.

When a recognition error occurs frequently,

rub the back of the collar approximately

20 times with a toothbrush.

Tapered Area

Fig. 4A5-1

4OM-1840

1-5-2

1604-001

5.1 Cleaning Method of Vacuum Nozzles

Remove Nozzle Filter

Refer to "5.3 Nozzle Filter Removal Procedure"

for details.

Blow air Vacuum Nozzle

Confirm that there is no clog in pick-up hole

Refer to "5.4 Method of Blow air" for details.

Confirm the clog in the top of pick-up hole by

the magnifying glass.

Refer to "5.5 Cleaning of high-speed nozzle

hole part with pin gauge" for details.

Remove Vacuum Nozzle

Refer to "5.2 Method of detaching vacuum

nozzle" for details.

Insert the nozzle filter

Refer to "5.6 Nozzle Filter Insertion Procedure"

for details.

Reference

Fig. 4A5-2

NOTICE

In the case that the ultra-sonic cleaning method and

solvent are used for the nozzle cleaning operation,

the adhesive applied onto the nozzle joint section

would be degraded, which could cause adhesive

ablation and damage to the nozzle unit.