4M184002w_F8S - 第16页
Safety Precautions Safe-7 1OM-1840 1604-001 3. Common Precautionary Items Notes on Installation, T ransfer and Maintenance Do not install or transfer the machine on the customer side after shipment. T o ensure perfect…
Safety Precautions
Safe-6
1OM-1840
1604-001
3. Common Precautionary Items
When the operation is to be performed, make sure that the [PNL CHANGE]
button ashes (in green).
If the [PNL CHANGE] button does not ash, it can be dangerous because the
operation window can be changed from the opposite side.
When there is a problem with the machine, locate the cause and assess the
condition. Set the power breaker to "OFF".
After the problem has been rectied completely, reset the machine to its normal
condition.
that the static machine is in the "Automatic" mode (standby mode).
When the machine stops due to a component pickup error, be sure to remove the
mispicked component from the feeder and start the automatic operation.
Safety Precautions
Safe-7
1OM-1840
1604-001
3. Common Precautionary Items
Notes on Installation, Transfer and Maintenance
Do not install or transfer the machine on the customer side after shipment.
To ensure perfect operation of the machine, including safety and accuracy, only the
marketing department or sales agency of Yamaha Motor Co., Ltd. will install the
machine or transfer it to another place.
Only the maintenance work on items described in this manual should be performed by
the customer. Please read the instruction manual carefully before maintenance work.
Do not perform any maintenance work on items that are not described in this manual.
Otherwise, not only breakdown of the machine but also personal injury may result.
When an alert label has deteriorated and become illegible, contact the marketing
department or sales agency of Yamaha Motor Co., Ltd..
Only a well-trained service person should perform maintenance work carefully
through for the machine in compliance with the instructions.
Before the maintenance work, be sure to turn o the power breaker and lock
them with padlocks.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its substitute.
Even when the power breaker is set to "OFF", the primary line is powered,
making it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before maintenance work.
Residual voltages may remain behind for a few minutes in the internal devices
of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of the DC power
is set to "OFF".
Do not mount on the machine’s top surface. Otherwise, you might fall from it.
When you access inside the machine, work with care for things overhead.
Safety Precautions
Safe-8
1OM-1840
1604-001
CE marking
This equipment conforms to the EU Machinery Directive 2006/42/EC (description A1
below) and EMC Directive 2014/30/EU (description A2 below).
However, this equipment does not bear CE marking if a custom order item was installed.
A1.
manuals, CE declarations, operation screen characters, and warning labels when this
equipment is installed in an EU country.
• All materials except warning labels are written in English only.
A2.
EMC description
• Electromagnetic immunity (Immunity)
• Electromagnetic emissions (Emission)
55011.
Note
Class A equipment is intended for use in industrial environments. If used in other
Refer to EN 55011 standards for detailed information.
3. Common Precautionary Items