4M184002w_F8S - 第174页
Error ID Error Name, Description, Cause, and Remedy 402201 V acuum pump stop Circuit breaker of V acuum pomp was tripped. Check vacuum pump and wiring. 402301 Beam1 Breaker O Circuit breaker of XY Beam1 was tripped. Che…
Error ID Error Name, Description, Cause, and Remedy
401701 Head2 Nozzle descending
Head2 descent was detected. [B-B3103]
Please perform a zeroing.
401801 Detecting pickup miss Cmpnt(Block1)
A pickup-failed component (Block1) was detected. [DA-B0514]
1. Open the cover.
2. Conrm suppressor, Disengaged Latch and remove the Pickup miss cmpnt.
3. Close the cover and then Lock it.
401901 Detecting pickup miss Cmpnt(Block2)
A pickup-failed component (Block2) was detected. [DB-B0515]
1. Open the cover.
2. Conrm suppressor, Disengaged Latch and remove the Pickup miss cmpnt.
3. Close the cover and then Lock it.
401A01 Feeder Opening Sensor(Block1)
The feeder opening sensor (Block1) was shaded. [B****]
Please remove the factor which is shading the feeder opening sensor (Block1),
and carry out zero return.
401B01 Feeder Opening Sensor(Block2)
The feeder opening sensor (Block2) was shaded. [B****]
Please remove the factor which is shading the feeder opening sensor (Block2),
and carry out zero return.
401C01 Detecting Feeder Disengaged Latch(Block1)
Disengaged Latch(Block1) was detected.
1. Open the cover.
2. Conrm suppressor, Disengaged Latch and remove the Pickup miss cmpnt.
3. Close the cover and then Lock it.
401D01 Detecting Feeder Disengaged Latch(Block2)
Disengaged Latch(Block2) was detected.
1. Open the cover.
2. Conrm suppressor, Disengaged Latch and remove the Pickup miss cmpnt.
3. Close the cover and then Lock it.
401E01 Cancelling the safety cover lock
The safety cover lock was released.
Close the safety cover and lock it.
401F01 Detecting interlock of Head1
Head1 interlock was detected.
Please perform a zeroing.
402001 Detecting interlock of Head2
Head2 interlock was detected.
Please perform a zeroing.
402101 Detecting air pressure down
Air pressure down was detected.
Check air pipe came o or bend, air compressor.
3.1 Safety Device
4OM-1840
3-3-121604-001
Error ID Error Name, Description, Cause, and Remedy
402201 Vacuum pump stop
Circuit breaker of Vacuum pomp was tripped.
Check vacuum pump and wiring.
402301 Beam1 Breaker O
Circuit breaker of XY Beam1 was tripped.
Check servo amplier and cables.
402401 Beam2 Breaker O
Circuit breaker of XY Beam2 was tripped.
Check servo amplier and cables.
402501 Over squeeze1 detected (Head1)
Over squeeze1 detected (Head1)[B05]
-----
402601 Over squeeze2 detected (Head1)
Over squeeze2 detected (Head1)[B05]
-----
402701 Over squeeze3 detected (Head1)
Over squeeze3 detected (Head1)[B05]
-----
402801 Pass Line1 Detected(Head1)
Pass Line1 detected(Head1)[B04]
-----
402901 Pass Line2 Detected(Head1)
Pass Line2 detected(Head1)[B04]
-----
402A01 Pass Line3 Detected(Head1)
Pass Line3 detected(Head1)[B04]
-----
402B01 Nozzle oat up1 detected(Block1)
Nozzle oat up 1 detected(Block1)[B1611]
Conrm Nozzle of Nozzle Stocker1(Block1).
402C01 Nozzle oat up2 detected(Block1)
Nozzle oat up 1 detected(Block1)[B1611]
Conrm Nozzle of Nozzle Stocker2(Block1).
402D01 Over squeeze1 detected (Head2)
Over squeeze1 detected (Head2)[B05]
-----
402E01 Over squeeze2 detected (Head2)
Over squeeze2 detected (Head2)[B05]
-----
402F01 Over squeeze3 detected (Head2)
Over squeeze3 detected (Head2)[B05]
-----
403001 Pass Line1 Detected(Head2)
Pass Line1 detected(Head2)[B04]
-----
3.1 Safety Device
4OM-1840
3-3-131604-001
Error ID Error Name, Description, Cause, and Remedy
403101 Pass Line2 Detected(Head2)
Pass Line2 detected(Head2)[B04]
-----
403201 Pass Line3 Detected(Head2)
Pass Line3 detected(Head2)[B04]
-----
403301 Nozzle oat up1 detected(Block2)
Nozzle oat up1 (Block2) detected[B1611]
Conrm Nozzle of Nozzle Stocker1(Block2).
403401 Nozzle oat up2 detected(Block2)
Nozzle oat up2 (Block2) detected[B1611]
Conrm Nozzle of Nozzle Stocker2(Block2).
403501 Detecting Emergency stop (Block1)
Emergency stop(Block1) is detected
Drive after the power turns on.
403601 Tray Safety Door(Lower)(Block1)
Safety door (lower) of tray feeder unit opened.(Block1)[S0501]
Close the safety door(Lower) and operate it.
403701 Tray Safety Door(Upper)(Block1)
Safety door (upper) of tray feeder unit opened.(Block1)[S0502]
Close the safety door(Center) and operate it.
403801 Tray Safety Door(Center)(Block1)
Safety door (center) of tray feeder unit opened.(Block1)[S0503]
Close the safety door(Upper) and operate it.
403901 Pallet Chuck Claw(Block1)
Chucking lever of pallet opened while elevator is moving.(Block1)
[B15407, B15408]
Check out detecting Sensor (B15407, B15408) of closing Chucking lever of pallet.
403A01 Pallet ying away(Block1)
The pallet ying away while elevator is moving.(Block1)[B15406]
Check out detecting sensor (B15406) of breaking out Pallet and position of Pallet.
403B01 Detecting pickup miss cmpnt on Tray Pallet (Block1)
Detect pickup miss components on the pallet. (Block1)[B15417]
Please open the main cover and remove pickup miss components on the pallet.
403C01 Detecting pickup miss cmpnt on Tray Pallet (Block1)
Detect pickup miss components on the pallet. (Block1)[B15418]
Please open the main cover and remove the pickup miss components on tray
pallet.
403D01 Detecting pickup miss cmpnt on Tray Pallet (Block1)
Detect pickup miss components on the pallet. (Block1)[B15419]
Please open the main cover and remove the pickup miss components on tray
pallet.
3.1 Safety Device
4OM-1840
3-3-141604-001