4M184002w_F8S - 第18页
Safety Precautions Safe-9 1OM-1840 1604-001 4. Alert Indications in Instruction Manual The following summarizes the precautionary items and the location of alert indications in the instruction manual. Alert Indications d…
Safety Precautions
Safe-8
1OM-1840
1604-001
CE marking
This equipment conforms to the EU Machinery Directive 2006/42/EC (description A1
below) and EMC Directive 2014/30/EU (description A2 below).
However, this equipment does not bear CE marking if a custom order item was installed.
A1.
manuals, CE declarations, operation screen characters, and warning labels when this
equipment is installed in an EU country.
• All materials except warning labels are written in English only.
A2.
EMC description
• Electromagnetic immunity (Immunity)
• Electromagnetic emissions (Emission)
55011.
Note
Class A equipment is intended for use in industrial environments. If used in other
Refer to EN 55011 standards for detailed information.
3. Common Precautionary Items
Safety Precautions
Safe-9
1OM-1840
1604-001
4. Alert Indications in Instruction Manual
The following summarizes the precautionary items and the location of alert indications in
the instruction manual.
Alert Indications described as "
DANGER
"
Alert Description Pages
There are strong motorized and high-voltage areas inside the
machine. Special caution should be paid not to touch them.
Doing otherwise will cause personal injury (serious accident).
•
Only qualied maintenance personnel should detach the
covers.
•
The machine should be operated with the covers being
attached.
•
If a cover is detached, be sure to reattach it.
•
Be sure to close the transparent covers (door type) before
operating the machine.
•
Do not disengage the interlock mechanism of the transparent
covers (door type).
"2.2.3" in
"Chapter 1 (Vo. 1)"
"1.1.3" in
"Chapter 3 (Vol. 1)"
4. Alert Indications in Instruction Manual
Safety Precautions
Safe-10
1OM-1840
1604-001
4. Alert Indications in Instruction Manual
Alert Indications described as "
WARNING
"
Alert Description Related Items
Be sure to keep the all transparent covers closed to avoid any
danger when the automatic operation is started or during the
automatic operation.
"2.2.3" in
"Chapter 1 (Vol. 1)"
Before performing maintenance work, shut o the power breaker
and lock the power breaker with the padlock.
"2.3.1" in
"Chapter 1 (Vol. 1)"
Those who wear implanted pacemakers are not allowed to work
inside the machine.
This machine uses strong permanent magnets in the moving
areas of the X/Y beams.
The pacemaker may be aected by the magnetism and a serious
accident will result.
"3.4" in
"Chapter 1 (Vol. 1)"
If the bank feeder change cart is not set, a clearance will be left
at the feeder setting area and the operator will be exposed to
danger.
Be sure to use the machine with the bank feeder change cart
being attached.
"3.8.1" in
"Chapter 1 (Vol. 1)"
Those who wear implanted pacemakers are not allowed to
handle the tape feeders.
The pacemaker may be aected by the magnetism and a serious
accident will result.
"1.2.2" in
"Chapter 3 (Vol. 1)"
"2.2.4" in
"Chapter 3 (Vol. 1)"
Only a well-trained service person should perform maintenance
tasks carefully through the specied procedures.
"1.1" in
"Chapter 1 (Vol. 4)"
Before maintenance work, shut o the power breaker and lock
the power breaker with the padlock.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its
substitute.
"1.1" in
"Chapter 1 (Vol. 4)"