4M184002w_F8S - 第213页

Error ID Error Name, Description, Cause, and Remedy 42b106 Shutter Conveyor Error in Output side PCB is not detected from Decrease Sensor after nishing completely . Please conrm whether PCB is detected properly . And c…

Error ID Error Name, Description, Cause, and Remedy

42a201 Time-out of Shuttle Conveyor in Input side

Time-out is occurred during insert mode from Input Machine.

There is a possibility that PCB is stopped on conveyor.

1. Please conrm PCB position.

2. Please conrm whether Conveyor Width is t.

3. Please setup Input Conveyor Timer Value of System settings, and adjust

insert time.

42a202 Time-out of Shuttle Conveyor in Input side

Time-out is occurred during insert mode for Inner Machine.

PCB is stopped on Conveyor. Please conrm PCB Position.

1. Please conrm whether Transit Position from shuttle Conveyor is proper.

2. Please conrm whether Conveyor Width is t.

42a203 Time-out of Shuttle Conveyor in Input side

Time-out is occurred while Delivery Position from Input Machine is being moved.

Please conrm whether there is no error in Unit, no interference or not.

42a204 Time-out of Shuttle Conveyor in Input side

Time-out is occurred while Transfer position is being moved to Inner Machine.

Please conrm whether there is no error in Unit, no interference or not.

42a301 Shutter Conveyor Error in Input side

Error is made while Shuttle Conveyor is working.

-----

42b101 Shutter Conveyor Error in Output side

Decrease Sensor is detected before starting to operate.

Please remove PCB from Shuttle Conveyor.

42b102 Shutter Conveyor Error in Output side

Decrease Sensor is not detected before starting to operate.

PCB to output is not found.

1. Please conrm whether PCB is detected by Sensor.

2. There is a possibility that PCB is dropping. Please conrm whether Conveyor

Width is t or not.

42b103 Shutter Conveyor Error in Output side

Stop Sensor is detected before starting to operate.

Please remove PCB from Shuttle Conveyor.

42b104 Shutter Conveyor Error in Output side

Stop Sensor is not detected before starting to operate.

PCB to output is not found.

1. Please conrm whether PCB is detected by Sensor.

2. There is a possibility that PCB is dropping.

Please conrm whether Conveyor Width is t or not.

42b105 Shutter Conveyor Error in Output side

PCB is detected from Decrease Sensor after nishing completely.

Please remove PCB from Shuttle Conveyor.

3.3 Conveyor

4OM-1840

3-3-511604-001

Error ID Error Name, Description, Cause, and Remedy

42b106 Shutter Conveyor Error in Output side

PCB is not detected from Decrease Sensor after nishing completely.

Please conrm whether PCB is detected properly. And conrm whether Sensor

did not break down.

42b107 Shutter Conveyor Error in Output side

PCB is detected from Stop Sensor after nishing completely.

Please remove PCB from Shuttle Conveyor.

42b108 Shutter Conveyor Error in Output side

PCB is not detected from Stop Sensor after nishing completely.

Please conrm whether PCB is detected properly. And conrm whether Sensor

did not break down.

42b109 Shutter Conveyor Error in Output side

PCB is detected from Shuttle Conveyor.

Please remove PCB from Conveyor.

42b10a Shutter Conveyor Error in Output side

PCB is not detected from Shuttle Conveyor.

Please conrm whether PCB is detected properly. And conrm whether Sensor

did not break down.

42b10b Shutter Conveyor Error in Output side

PCB has not got to shuttle Conveyor from Inner Machine.

PCB from Input Machine is not transferred.

Please conrm whether PCB on the conveyor for Input machine is caught

42b10c Shutter Conveyor Error in Output side

PCB is still on Shuttle Conveyor.

Output for Output Machine has not completed.

Please conrm PCB position.

42b10d Shutter Conveyor Error in Output side

PCB on Shuttle Conveyor is gone.

It is possible to operate continuously.

Please conrm whether PCB went o its position if PCB is not removed on

purpose.

42b10e Shutter Conveyor Error in Output side

PCB on Shuttle Conveyor is changed.

PCB is inserted while not possible to be inserted. Please remove inserted PCB.

42b10f Shutter Conveyor Error in Output side

The Sensor of Shuttle Conveyor is detected from both sides.

There is a possibility that two pieces of PCB are inserted. Please remove an

uncertain PCB.

42b201 Time-out of Shuttle Conveyor in Output side

Time-out is occurred during insert mode from inner Machine.

There is a possibility that PCB is stopped on conveyor.

1. Please conrm PCB position.

2. Please conrm whether Conveyor Width is t.

3. Please setup Input Conveyor Timer Value of System settings, and adjust

insert time.

3.3 Conveyor

4OM-1840

3-3-521604-001

Error ID Error Name, Description, Cause, and Remedy

42b202 Time-out of Shuttle Conveyor in Output side

Time-out is occurred during Output Mode for Output Machine.

PCB is stopped between Conveyors. Check out PCB position.

1. Please conrm whether Transit position from shuttle conveyor is proper.

2. Please conrm whether Conveyor Width is t.

42b203 Time-out of Shuttle Conveyor in Output side

Time-out is occurred while Transfer position from Inner Machine is being moved.

Please conrm whether there is no error in Unit, no interference or not.

42b204 Time-out of Shuttle Conveyor in Output side

Time-out is occurred while Delivery Position is being moved to Output Machine.

Please conrm whether there is no error in Unit, no interference or not.

42b301 Shuttle Conveyor Error in Output side.

Error is made while Shuttle Conveyor is working.

-----

42b401 Transfer check

PCB is detected on the conveyor. Please remove it.

-----

42b501 Transfer check

Going down in PCB stopper(L) was not completed within the predetermined time.

-----

42b502 Transfer check

Going down in PCB stopper(R) was not completed within the predetermined time.

-----

42b503 Transfer check

Going down in PCB stopper(AL) was not completed within the predetermined

time.

-----

42b504 Transfer check

Going down in PCB stopper(AR) was not completed within the predetermined

time.

-----

42b505 Transfer check

Going down in PCB stopper(BL) was not completed within the predetermined

time.

-----

42b506 Transfer check

Going down in PCB stopper(BR) was not completed within the predetermined

time.

-----

42b601 Transfer check

Going down in the backup base(L) was not completed within the predetermined

time.

-----

3.3 Conveyor

4OM-1840

3-3-531604-001