4M184002w_F8S - 第224页
Error ID Error Name, Description, Cause, and Remedy 49075C Nozzle set up XY Beam start-up has not be completed within predetermined time ----- 49075D Nozzle set up Failed in XY -axis start-up ----- 49075E Nozzle set up F…
Error ID Error Name, Description, Cause, and Remedy
49074D Nozzle set up
Error in coordinate calculation of Noz Stocker Mark position.
-----
49074E Nozzle set up
Error in coordinate calculation of detect starting position for Linear Measure.
-----
49074F Nozzle set up
Error in coordinate calculation of detect nishing position for Linear Measure
-----
490750 Nozzle set up
Error in coordinate calculation of recog position of Noz ID
-----
490751 Nozzle set up
Error in coordinate calcualtion of recog position of Noz in Stocker
-----
490752 Nozzle set up
Error in coordinate calculation of exchange position of Noz (Placing Noz)
-----
490753 Nozzle set up
Error in calculating Placing height for Noz (Placing Noz)
-----
490754 Nozzle set up
Error in calculating Placing height for Noz (Placing Noz)
-----
490755 Nozzle set up
Error in coordinate calculation of exchange position of Noz (Storing Noz)
-----
490756 Nozzle set up
Error in calculating Storing Height for Noz (Storing Noz)
-----
490757 Nozzle set up
Error in calculating Storing Height for Noz (Storing Noz)
-----
490758 Nozzle set up
Error in setting Sequence Data of XY-axis
-----
490759 Nozzle set up
Error in setting Drive Wave of DD-axis
-----
49075A Nozzle set up
Error in setting Drive Wave of NS-axis
-----
49075B Nozzle set up
Error in setting Drive Wave of Z-axis
-----
3.6 Automatic Adjustment
4OM-1840
3-3-621604-001
Error ID Error Name, Description, Cause, and Remedy
49075C Nozzle set up
XY Beam start-up has not be completed within predetermined time
-----
49075D Nozzle set up
Failed in XY-axis start-up
-----
49075E Nozzle set up
Failed in DD-axis start-up
-----
49075F Nozzle set up
Failed in NS-axis start-up
-----
490760 Nozzle set up
Failed in Z-axis start-up
-----
490761 Nozzle set up
XY-axis Operating has not been completed within predetermined time
-----
490762 Nozzle set up
Error in XY-axis operating
-----
490763 Nozzle set up
XY Beam Operating has not been completed within predetermined time
-----
490764 Nozzle set up
Error in setting Drive Wave of HL-axis
-----
490765 Nozzle set up
Error in setting Drive Wave of NL-axis
-----
490766 Nozzle set up
Error in setting Drive Wave of NL-axis
-----
490767 Nozzle set up
Error in setting Drive Wave of L-axis
-----
490768 Nozzle set up
Up/Down axis start-up has not been completed within predetermined time
-----
490769 Nozzle set up
Failed in HL-axis start-up
-----
49076A Nozzle set up
Failed in NL-axis start-up
-----
3.6 Automatic Adjustment
4OM-1840
3-3-631604-001
Error ID Error Name, Description, Cause, and Remedy
49076B Nozzle set up
Failed in L-axis start-up
-----
49076C Nozzle set up
Up/Down axis start-up has not been completed within predetermined time
-----
49076D Nozzle set up
Error in turning on PCB recog camera Light
-----
49076E Nozzle set up
Turning on PCB recog camera Light has not nished within predetermined time
-----
49076F Nozzle set up
Error in turning on PCB recog camera Light
-----
490770 Nozzle set up
Error in turning on PCB recog camera Light (Teaching Noz Stocker)
-----
490771 Nozzle set up
Turning on PCB recog camera Light has not nished within predetermined time
(Teaching Noz Stocker)
-----
490772 Nozzle set up
Error in turning on PCB recog camera Light (Teaching Noz Stocker)
-----
490773 Nozzle set up
Error in turning on PCB recog camera Light (Noz Recog)
-----
490774 Nozzle set up
Turning on PCB recog camera Light has not nished within predetermined time
(Noz Recog)
-----
490775 Nozzle set up
Error in turning on PCB recog camera Light (Noz Recog)
-----
490776 Nozzle set up
Error in turning o PCB recog camera Light
-----
490777 Nozzle set up
Turning o PCB recog camera Light has not nished within predetermined time
-----
490778 Nozzle set up
Error in turning o PCB recog camera Light
-----
3.6 Automatic Adjustment
4OM-1840
3-3-641604-001