4M184002w_F8S - 第25页
Safety Precautions Safe-16 1OM-1840 1604-001 5. Alert Labels 5. Alert Labels The alert labels (described below) are used for this machine. Please read the instructions on each label carefully and check the contents, obse…
Safety Precautions
Safe-15
1OM-1840
1604-001
Alert Indications described as "
CAUTION
" (continued)
Alert Description Related Items
The padlock key should be kept in such a way that nobody except the
personnel in charge of maintenance can supervise it.
"4.3" in
"Chapter 2 (Vol. 1)"
The load power to the motors, etc., is turned OFF but the setup
operation must be performed carefully when you put your hand
inside the machine. Avoid hand and nger injuries.
"2.3.5" in
"Chapter 3 (Vol. 1)"
"4.1" and "4.2.1" in
"Chapter 6 (Vol. 2)"
Even when the power breaker is set to "OFF", the primary line is
powered, making it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before
maintenance work.
"1.1" in
"Chapter 1 (Vol. 4)"
Residual voltages may remain behind for a few minutes in the
internal devices of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of
or more after the power breaker is set to "OFF".
"1.1" in
"Chapter 1 (Vol. 4)"
When the at ring is cut, take care not to get injured by the
commercially available cutter.
"3.2.6" in
"Chapter 1 (Vol. 4)"
4. Alert Indications in Instruction Manual
Safety Precautions
Safe-16
1OM-1840
1604-001
5. Alert Labels
5. Alert Labels
The alert labels (described below) are used for this machine.
Please read the instructions on each label carefully and check the contents, observing the
actual object.
Be sure to follow the instructions for safety purposes.
These labels should be kept clean and easily legible at a far safe distance.
When a label has deteriorated and become illegible, contact the marketing department or
sales agency of Yamaha Motor Co., Ltd. for the replacement with a new one.
Safety Precautions
Safe-17
1OM-1840
1604-001
5. Alert Labels
Location of Alert Labels
Refer to "Alert Labels and Description" for details.
Front Side of Machine
(1)
(17)
(7)
(8)
(3)
(5)
(5)
(11)
(4)
Fig. X1