4M184002w_F8S - 第273页

3.1 1 T est Error ID Error Name, Description, Cause, and Remedy 610101 Opearation error has occurred. ----- ----- T4C16 3.1 1 T est 4OM-1840 3-3-1 12 1604-001

100%1 / 315
Error ID Error Name, Description, Cause, and Remedy
511220 Transfer Section's Preparation Error
Upward movement on PCB Stopper(REV) is abnormal.
There is a possibility that PCB stopper is broken or not Air in.
511221 Transfer Section's Preparation Error
Downward movement on PCB Stopper(REV) is abnormal.
There is a possibility that PCB stopper is broken or not Air in.
511222 Transfer Section's Preparation Error
Upward Limit and Downward Limit on PCB Stopper(AREV) are detected
simultaneously.
Please check out the wiring and adjust Limits.
511223 Transfer Section's Preparation Error
Upward movement on PCB Stopper(AREV) is abnormal.
There is a possibility that PCB stopper is broken or not Air in.
511224 Transfer Section's Preparation Error
Downward movement on PCB Stopper(AREV) is abnormal.
There is a possibility that PCB stopper is broken or not Air in.
511225 Transfer Section's Preparation Error
Upward Limit and Downward Limit on PCB Stopper(BREV) are detected
simultaneously.
Please check out the wiring and adjust Limits.
511226 Transfer Section's Preparation Error
Upward movement on PCB Stopper(BREV) is abnormal.
There is a possibility that PCB stopper is broken or not Air in.
511227 Transfer Section's Preparation Error
Downward movement on PCB Stopper(BREV) is abnormal.
There is a possibility that PCB stopper is broken or not Air in.
511301 Added squeeze error
Added squeeze is not completed.
Open the safety cover and check the placed components. Then, please remove
or revise them.
511401 Automatic correction of missed standard mark
Error in automatic correction of missed standard mark.
Please redo oset teaching of PCB mark position.
511402 Automatic correction of missed standard mark
Timeout of automatic correction of missed standard mark.
Please redo oset teaching of PCB mark position.
511403 Automatic correction of missed standard mark
Error in recognizing standard mark.
Please redo oset teaching of PCB mark position.
T4C14
3.10 Automatic Operation Error
4OM-1840
3-3-1111604-001
3.11 Test
Error ID Error Name, Description, Cause, and Remedy
610101 Opearation error has occurred.
-----
-----
T4C16
3.11 Test
4OM-1840
3-3-1121604-001
3.12 Barcode Detection
Error ID Error Name, Description, Cause, and Remedy
700101 Barcode Detection
The bar code data is not read.
-----
700102 Barcode Detection
The pattern program is not found.
-----
700111 Barcode Detection
Program -change was not able to executed.
-----
700112 Barcode Detection
Application error.
-----
700114 Barcode Detection
The product.operation was not able to begin.
-----
700115 Barcode Detection
Bar Code Program-change process cannot be excuted "PRODUCT.SCRN,"or
"COMP.RELD.SCRN."
-----
700118 Barcode Detection
Illegal bar code ID.
-----
700119 Barcode Detection
Bar code ID eective range is illegal.
-----
700120 Barcode Detection
Ptn.Prgm. specied by Crnt.Prgm. and barcode is dierent.
-----
700125 Barcode Detection
2D bar code mode of the pattern program is "Disable".
-----
700151 Barcode Detection
It is impossible to change Barcode on the Dual machine.
-----
700152 Barcode Detection
Current program is not set.
-----
700153 Barcode Detection
PCB nishing position of Pattern Program for Program Change is set except [Input]
and [Output].
-----
3.12 Barcode Detection
4OM-1840
3-3-1131604-001