4M184002w_F8S - 第38页

Safety Precautions Safe-29 1OM-1840 1604-001 5. Alert Labels Alert Labels and Description No. Alert Labels and Description (1) Description    Th…

100%1 / 315
Safety Precautions
Safe-28
1OM-1840
1604-001
5. Alert Labels
(20)
Do not touch your hand to the Reference Mark Block.
When a strong force is given to the reference mark block,
it might be deformed.
PEC Recognition Camera
Fig. X16
Safety Precautions
Safe-29
1OM-1840
1604-001
5. Alert Labels
Alert Labels and Description
No. Alert Labels and Description
(1)
Description

Those who wear implanted pacemakers should not work inside the machine.

(2)
Description
Permanent magnets are used in the tape feeding and cover tape take-up sections of
the tape feeder.
Do not allow any person who wears an implanted pacemaker to handle the tape

accident.
(3)
Description

machine or air source. When maintenance or checks are performed with the power
or air turned ON, an electric shock or injury might be caused.
Safety Precautions
Safe-30
1OM-1840
1604-001
5. Alert Labels
No. Alert Labels and Description
(4)
Description
Only well-trained service personnel shall replace the cutter blades. Otherwise, a
hand injury, etc., will result.
(5)
Description
This label indicates that high voltage is applied to the area. Residual voltages may
remain behind for a few minutes in the internal devices of the machine after power
interception.
Before performing maintenance work, wait until the charge lamps of the DC power

breaker is set to "OFF".
(6)
Description
Before connecting to the breaker's primary power leading-in section, connect the
grounding cable (PE).
Imperfect grounding will cause an electric shock.